中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

重庆交通大学学报(自然科学版) ›› 2019, Vol. 38 ›› Issue (09): 63-67.DOI: 10.3969/j.issn.1674-0696.2019.09.11

• 道路与铁道工程 • 上一篇    下一篇

BIM技术在公路边坡的应用探究

孙建诚,朱双晗,蒋浩鹏   

  1. (河北工业大学 土木与交通学院,天津 300400)
  • 收稿日期:2018-08-07 修回日期:2018-09-18 出版日期:2019-09-18 发布日期:2019-09-18
  • 作者简介:孙建诚(1969—),男,河北冀州人,副教授,博士,主要从事公路工程和BIM理论方面的研究。E-mail:1573683903@qq.com。 通信作者:朱双晗(1993—),女,山东日照人,硕士研究生,主要从事公路工程方面的研究。E-mail:1256925673@qq.com。

Application of BIM Technology to Highway Slope

SUN Jiancheng, ZHU Shuanghan, JIANG Haopeng   

  1. (School of Civil and Traffic Engineering, Hebei University of Technology, Tianjin 300400, P. R. China)
  • Received:2018-08-07 Revised:2018-09-18 Online:2019-09-18 Published:2019-09-18

摘要: 针对BIM技术在公路边坡的应用还不成熟现状,基于IFC标准功能层和数据传输规则,给出了公路边坡BIM模型设计、施工和运维管养规范化技术路线。结合工程实例,对Revit和Civil 3D在公路边坡BIM的应用中进行了对比。研究表明:这两款软件从不同建模思路出发,在参数设置、信息量化、模型分析等技术功能上各有侧重。研究成果为BIM技术在我国公路边坡设计和应用中提供了技术路线和技术经验。

关键词: 道路工程, 边坡, BIM, 技术路线, 三维模型

Abstract: Owing to the under development of BIM technology applied to the highway slope and the IFC standard function layer and data transmission rules, the standardized technical routes of highway slope BIM model design, construction, operation and maintenance were given. Combined with the project example, the application of Revit and Civil 3D to the highway slope was compared. Based on different modeling ideas, the research shows that each software has its emphasis on the technical functions of parameter setting, information quantification and model analysis, and the result provides the technical route and technical experience for BIM technology to be applied to Chinas highway slope.

Key words: highway engineering, slope, BIM, technical route, 3D model

中图分类号: