中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2012, Vol. 31 ›› Issue (4): 747-750.DOI: 10.3969/j.issn.1674-0696.2012.04.03

Previous Articles     Next Articles

Study on Two-Dimensional Damage Identification of T-Beam Based on Gaussian Curvature Mode Difference

Han Xi1,Li Qing-da1,Zhong Li2,Yang Ke1   

  1. 1.School of Civil Engineering & Architecture,Chongqing Jiaotong University,Chongqing 400074,China; 2.School of Mechatronics & Automotive Engineering,Chongqing Jiaotong University,Chongqing 400074,China
  • Received:2011-12-14 Revised:2011-12-26 Online:2012-08-15 Published:2015-03-12

基于高斯曲率模态差的T 梁结构二维损伤识别研究

韩西1,李庆达1,钟厉2,杨科1   

  1. 1. 重庆交通大学土木建筑学院,重庆400074; 2. 重庆交通大学机电与汽车工程学院,重庆400074
  • 作者简介:韩西( 1964—) ,男,重庆人,教授,博士,主要从事结构力学、振动工程方面的研究。E-mail:xihan@cquc。Edu.cn.
  • 基金资助:
    重庆市交通委员会科技项目( 701487)

Abstract: Curvature mode is a sensitive indicator to identify damage. Most researches on damage identification based on curvature mode are limited to one-dimensional structure. Damage identification based on Gaussian curvature mode was presented to extend curvature mode into two-dimensional structure,considering the degree of bending about two-dimensional structure of acceleration mode shape in the vertical level and horizontal level and locating the position of damage by calculating the Gaussian curvature difference of acceleration mode of structural damage on before and after. Mode test of the combination of T-beam structure and its results analysis show the feasibility of the proposed method.

Key words: Gaussian curvature, combination of T-beam structure, damage identification, two-dimensional identification

摘要: 曲率模态是识别损伤的敏感指标,基于曲率模态的损伤识别研究大多局限于一维结构。为将曲率模态的损伤 识别方法推广到二维结构,提出了基于高斯曲率模态的损伤识别方法,综合考虑二维结构的加速度振型曲面在纵向 和横向上的弯曲程度,通过计算结构损伤前后加速度振型的高斯曲率差来判断结构损伤的位置。T梁组合结构的 模态试验及试验分析结果验证了该方法的可行性。

关键词: 高斯曲率, T梁组合结构, 损伤识别, 二维识别

CLC Number: