Multi-Objective Optimization Model of Containers Stacking in Transshipment Port Yard

doi:10.3969/j.issn.1674-0696.2013.06.39

Journal of Chongqing Jiaotong University(Natural Science) ›› 2013, Vol. 32 ›› Issue (6): 1275-1278.DOI: 10.3969/j.issn.1674-0696.2013.06.39

Multi-Objective Optimization Model of Containers Stacking in Transshipment Port Yard

Wang Bin¹,Xu Guoping²

1.School of Economics & Management , Shanghai Second Polytechnic Univerersity ， Shanghai 201209 , China; 2.School of Science & Technology , Ningbo University , Ningbo 315212 , Zhejiang , China

Received:2012-09-19 Revised:2013-03-26 Online:2013-12-15 Published:2015-01-22

中转港口堆场集装箱堆存多目标优化模型

王斌¹，徐国平²

1.上海第二工业大学经济管理学院，上海 201209 ;2.宁波大学科学技术学院，浙江宁波 315212

作者简介:王斌(1976—)，男，山东青岛人，副教授，博士，主要从事国际物流管理方面的研究。E-mail:wangbinI97647@126.com
基金资助:
上海市教委科研创新项目重点项目(09ZZ208) ;浙江省教育厅项目(Y201016471)

Abstract

Abstract: A multi-objective optimization model for containers stacking in the storage yard of a transshipment port was established. The optimal stacking plan for the storage yard was formulated to meet the requirements of ship berthing, whose objective was to minimize the number of yard cranes used in the storage yard and balance the workload among different blocks during the planning period. Based on the construction and solution of the model , the simulation analysis on the workload parameter was made to discover the influence of workload on the number of yard crane used and the balance of work distributIOn.

Key words: storage yard, containers, yard crane, 0-1 mixed integer programming, multi-objective programming

摘要： 建立了中转港堆场堆存多目标优化模型;在满足巾转港船舶靠泊要求下制定堆场最佳堆存方案，目标是最小化计划期内堆场的龙门吊使用数量和平衡各个箱区的工作量负荷;在建立和求解模型的基础上，仿真分析了工作量负荷参数，以揭示工作量负荷程度对于龙门吊使用数量和工作分配均衡性的影响。

关键词: 堆场, 集装箱, 龙门吊, 0-1混合整数规划, 多目标规划

CLC Number:

U169.65

Wang Bin,Xu Guoping. Multi-Objective Optimization Model of Containers Stacking in Transshipment Port Yard[J]. Journal of Chongqing Jiaotong University(Natural Science), 2013, 32(6): 1275-1278.

王斌，徐国平. 中转港口堆场集装箱堆存多目标优化模型[J]. 重庆交通大学学报（自然科学版）, 2013, 32(6): 1275-1278.

References

[1] Zhang C,Liu J,Wan Y W,et al.Storage space allocation in container terminals[J].Transportation Research B,2003,37:883-903.
[2] Murty K G,Liu J,Wan Y,et al.A decision support system for operations in a container terminal[J].Decision Support Systems,2005,39(3):309-332.
[3] Kozan E,Preston P.Mathematical modeling of container transfers and storage locations at seaport terminals[J].OR Spectrum,2006,28(4):519-537.
[4] Lee L H,Chew E P,Tan K C,et al.An optimization model for storage yard management in transshipment hubs[J].OR Spectrum,2006,28(4):539-561.
[5] Dekker R,Voogd P,Asperen E.Advanced methods for container stacking[J].OR Spectrum,2006,28(4):563-586.
[6] 李建中,丁以中,王斌.集装箱堆场空间动态配置模型[J].交通运输工程学报,2007,7(3):51-55.
Li Jianzhong,Ding Yizhong,Wang Bin.Dynamics pace deployment model of container storage yard[J].Journa1 of Traffic and Transportation Engineering,2007,7(3):51-55.
[7] Stahlbock R,Vob S.Operations research at container terminals:a literature updates[J].OR Spectrum,2008,30(1):1-52.
[8] 王锡淮,肖健梅,于晶.基于蚁群算法的集装箱堆场起重机优化调度[J].控制工程,2009,16(增刊1):135-138.
Wang Xihuai,Xiao Jianmei,Yu Jing.Crane scheduling in container yards based on ant colony optimization algorithm[J].Control Engineering of China,2009,16(S1):135-138.
[9] 计明军,刘丰硕,李郭记,等.基于装卸协同作业的集装箱码头集卡调度及配置优化[J].大连海事大学学报,2010,36(1):47-50.
Ji Mingjun,Liu Fengshou,Li Guoji,et al.Truck routing and allocation optimization based on loading and unloading simultaneous operations in a container terminal[J].Journal of Dalian Maritime University,2010,36(1):47-50.
[10] 周鹏飞,方波.动态环境下集装箱码头堆场出口箱箱位分配建模与算法研究[J].控制与决策,2011,26(10):1571-1576.
Zhou Pengfei,Fang Bo.Modeling and algorithm research on export container slots allocation under dynamic environments[J].Control and Decision,2011,26(10):1571-1576.

Multi-Objective Optimization Model of Containers Stacking in Transshipment Port Yard

中转港口堆场集装箱堆存多目标优化模型

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 7

Recommended Articles

Metrics

[1]	DING Yi, ZHANG Yang. Ship Stowage in Container Terminal Considering Yard Crane Scheduling [J]. Journal of Chongqing Jiaotong University(Natural Science), 2023, 42(1): 91-98.
[2]	GUO Wenwen1, JI Mingjun2, ZHU Huiling3, ZHOU Wenjie2. Optimization Model of Yard Crane Scheduling in a Container Terminal [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(06): 66-72.
[3]	LIANG Chengji, ZHOU Cong, LU Bo. Model and Algorithm for Yard Crane Scheduling Based on Container Groups [J]. Journal of Chongqing Jiaotong University(Natural Science), 2016, 35(4): 152-157.
[4]	Yang Bin, Rao Mingjun, Zhu Xiaolin, Xu Bowei. Fleet Deployment of Liner Ship Company Considering Vessel’s Emissions [J]. Journal of Chongqing Jiaotong University(Natural Science), 2015, 34(5): 120-125.
[5]	Wang Bin,Xu Guoping. Multi-Objective Optimization Model of Containers Stacking in Transshipment Port Yard [J]. Journal of Chongqing Jiaotong University(Natural Science), 2013, 32(6): 1275-1278.
[6]	Xu Yuanqin，Han Xiaolong. United Scheduling Model Optimization of Yard Truck，Quay Crane and Yard Crane [J]. Journal of Chongqing Jiaotong University(Natural Science), 2013, 32(2): 318-0320.
[7]	Lu Y axing. Rood-Toll Principles and Methods of Determining Road-Toll Standards [J]. Journal of Chongqing Jiaotong University(Natural Science), 1992, 11(1): 89-94.