中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2022, Vol. 41 ›› Issue (06): 113-118.DOI: 10.3969/j.issn.1674-0696.2022.06.17

• Transportation Infrastructure Engineering • Previous Articles     Next Articles

Application of Engineering Survey and Design BIM Technology in Landslide Control Project

PENG Haiyou1, CHEN Yu2, REN Xiuwen3, CHEN Bolin1, GUO Qi1, ZOU Changsheng3   

  1. (1.Chongqing Institute of Geology and Mineral Resources, Chongqing 401120, China; 2. Chongqing Geological Environment Monitoring Station, Chongqing 401122, China; 3. Chongqing Zhongke Survey and Design Co., Ltd., Chongqing 400042, China)
  • Received:2020-04-02 Revised:2020-12-17 Published:2022-06-22

工程勘察设计BIM技术在滑坡治理工程中的应用

彭海游1, 陈渝2, 任秀文3, 陈柏林1, 郭琪1,邹常生3   

  1. (1. 重庆地质矿产研究院, 重庆 401120; 2. 重庆市地质环境监测总站, 重庆 401122; 3. 重庆中科勘测设计有限公司, 重庆 400042)
  • 作者简介:彭海游(1986—),男,重庆人,高级工程师,博士生,主要从事地质灾害防治方面的研究。E-mail:penghaiyou@yeah.net
  • 基金资助:
    重庆市科研机构绩效激励引导专项项目(cstc2019jxjl00006);重庆市规划和自然资源局科技项目(KJ-2019002);重庆市勘察设计行业创新研究与能力建设项目(渝建〔2019〕329号);重庆市开州区科技计划项目(KZKJ-2021-J-15)

Abstract: D geology has been widely used in oil and gas, water conservancy and hydropower, minerals and other fields, while the application examples of engineering survey and design BIM technology developed from 3D geology in landslide treatment engineering are relatively few. By integrating the existing software and giving full play to the characteristics of each software, an application method of BIM technology for investigation and design of landslide treatment engineering was formed. Firstly, the survey data such as topographic mapping, geological drilling and geological profile were processed; secondly, with the help of the process modeling method of GOCAD software, the 3D geological model was constructed; finally, the 3D geological model was imported into the numerical analysis software to carry out the landslide treatment engineering design. Taking Chongqing Zhoujiayan landslide treatment project as an example, a practical application of the proposed BIM technical method for engineering survey and design was proposed. The practical effect of the project demonstrates the feasibility and practicability of the proposed technical method.

Key words: geotechnical engineering; landslide control project; BIM; 3D geological modeling; numerical analysis

摘要: 三维地质在油气、水利水电、矿产等领域已得到大量应用,而从三维地质发展起来的工程勘察设计BIM技术在滑坡治理工程中的应用实例相对较少。通过对现有软件的整合,充分发挥各软件特点,形成了一种滑坡治理工程勘察设计BIM技术应用方法。首先对地形测绘、地质钻孔和地质剖面等勘察数据进行处理;然后借助GOCAD软件的流程化建模方法构建三维地质模型;最后将三维地质模型导入数值分析软件开展滑坡治理工程设计。以重庆周家岩滑坡治理工程为例对提出的工程勘察设计BIM技术方法进行了实际应用,其工程实际效果论证了技术方法的可行性和实用性。

关键词: 岩土工程;滑坡治理工程;BIM;三维地质建模;数值分析

CLC Number: