预制节段拼装桥墩受力性能分析与模拟

doi:10.3969/j.issn.1674-0696.2020.07.11

重庆交通大学学报（自然科学版） ›› 2020, Vol. 39 ›› Issue (07): 73-80.DOI: 10.3969/j.issn.1674-0696.2020.07.11

预制节段拼装桥墩受力性能分析与模拟

杜青，张森博，卿龙邦

(河北工业大学土木与交通学院，天津 300401)

收稿日期:2019-06-05 修回日期:2019-09-23 出版日期:2020-07-16 发布日期:2020-07-21
作者简介:杜青(1961—)，男，河北秦皇岛人，教授，博士，主要从事桥梁结构方面的研究。E-mail：d33158@126.com 通信作者：张森博(1995—)，男，河北唐山人，硕士研究生，主要从事桥梁结构抗震方面的研究。E-mail：1017880212@qq.com
基金资助:
国家自然科学基金项目(51309073)

Analysis and Simulation of Mechanical Performance of Precast Segmental Assembly Piers

DU Qing, ZHANG Senbo, QING Longbang

(School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401, China)

Received:2019-06-05 Revised:2019-09-23 Online:2020-07-16 Published:2020-07-21

摘要/Abstract

摘要： 预制节段桥墩通过预应力筋施加的后张预应力获得自复位能力，通过耗能钢筋增加桥墩的耗能能力，在水平荷载作用下，桥墩各节段在接缝处会张开、闭合，具有摇摆及自复位结构的特点。根据现有的研究结果，结构的摇摆在其工作过程中可以有效降低地震作用，进而减小设计时结构的延性需求。在地震作用下，可以减小破坏，节约造价。本文参考国内外相关规范和已有研究成果，划分了预制节段桥墩的性能状态，提出了预制节段桥墩截面设计方法。为了具体说明设计步骤，对算例桥墩进行了设计。最后，利用有限元分析软件ADINA建立了实体模型，进行验证。研究表明：该设计方法简明合理，验证结果与预期相近，可以为以后此类桥墩的设计提供参考。

关键词: 桥梁工程, 预制节段桥墩, 自复位结构, 设计方法, 有限元分析

Abstract: The precast segmental piers obtained the re-centering ability through the post tensioned prestress applied by the prestressed reinforcement,and increased the energy consumption capacity of the pier through the energy dissipation steel bars.Under the action of horizontal load, each section of pier would open and close at the joints, which had the characteristics of swing and re-centering structure.According to the existing research results,the seismic action of the structure could be effectively reduced during the swing process, and the ductility requirement of the structure in design could be reduced. The final performance was to reduce the seismic damage of the structure and save the cost.Referring to the relevant domestic and foreign codes and the existing research results,the performance state of precast segmental piers was divided, and the design method of precast segmental pier section was proposed. Then, an example bridge pier was given to illustrate the specific design steps. Finally, the solid model was established by using the finite element analysis software ADINA to verify.The research shows that the proposed design method is simple and reasonable, and the verification results are similar to the expected ones, which can provide reference for the design of such piers in the future.

Key words: bridge engineering, precast segmental pier;re-centering structure, design method, finite element analysis

杜青，张森博，卿龙邦. 预制节段拼装桥墩受力性能分析与模拟[J]. 重庆交通大学学报（自然科学版）, 2020, 39(07): 73-80.

DU Qing, ZHANG Senbo, QING Longbang. Analysis and Simulation of Mechanical Performance of Precast Segmental Assembly Piers[J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(07): 73-80.

参考文献

［1］ YAMASHITA R, SANDERS D H. Seismic performance of precast unbonded prestressed concrete columns［J］. ACI Structural Journal, 2009, 106(6): 821-830.
［2］ OU Yuchen. Precast Segmental Post-tensioned Concrete Bridge Columns
for Seismic Regions［D］. Buffalo, USA: University at Buffalo, the State University of New York, 2007.
［3］ OU Yuchen, WANG Pinghsiung, TSAI Musen, et al. Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic
regions［J］.Journal of Structural Engineering, 2009, 136(3): 255-264.
［4］ WANG Juichen, OU Yuchen, CHANG Kuochun, et al. Large-scale seismic tests of tall concrete bridge columns with precast segmental construction［J］.Earthquake
Engineering & Structural Dynamics, 2008, 37(12): 1449-1465.
［5］LI Tiantian, QU Hongya, WANG Zhiqiang, et al. Seismic perfor-mance of precast concrete bridge columns with quasi-static cyclic shear test for high seismic
zones［J］. Engineering Structures, 2018, 166(1): 13-27.
［6］董振华，贾俊峰，韩强.低周荷载下FRP约束RC矩形空心墩的抗震性能试验研究［J］.重庆交通大学学报(自然科学版)，2013,32(增刊1)：827-831.
DONG Zhenhua, JIA Junfeng, HAN Qiang. Anti-seismic performance of rectangular hollow section of bridge pier with FRP confinement under reversal load［J］. Journal
of Chongqing Jiaotong University (Natural Science), 2013, 32(Sup1): 827-831.
［7］杜青，高松松，卿龙邦.内嵌钢管预应力装配式桥墩抗震性能研究［J］.重庆交通大学学报(自然科学版)，2017，36(9)：6-11.
DU Qing, GAO Songsong, QING Longbang. Seismic performance of prestressed assembled bridge piers with embedded steel tube［J］. Journal of Chongqing Jiaotong
University(Natural Science), 2017, 36(9): 6-11.
［8］ WANG Jingquan, WANG Zhen, TANG Yuchuan, et al. Cyclic loading test of self-centering precast segmental unbonded posttensioned UHPFRC bridge columns［J］.
Bulletin of Earthquake Engineering, 2018, 16(6): 331-360.
［9］ MOHEBBI A, SAIIDI M S, ITANI A M. Shake table studies and analysis of a precast two-column bent with advanced materials and pocket connections［J］. Journal
of Bridge Engineering, 2018, 23(7): 1-14.
［10］ ROH H, REINHORN A M. Hysteretic behavior of precast segmental bridge piers with superelastic shape memory alloy bars［J］. Engineering Structures, 2010, 32
(10): 3394-3403.
［11］ WANG Zhen, WANG Jingquan, LIU Tongxu, et al. An explicit analytical model for seismic performance of an unbonded post-tensioned precast segmental rocking
hollow pier［J］. Engineering Structures, 2018, 161(15): 176-191.
［12］ PAMPANIN S, NIGEL P M J, SRITHARAN S. Analytical modelling of the seismic behavior of precast concrete frames designed with ductile connections ［J］.
Journal of Earthquake Engineering, 2001, 5(3): 329-367.
［13］ MANDER J B, PRIESTLEY M J N, PARK R. Theoretical stress-strain model for confined concrete［J］. Journal of Structural Engineering, 1988, 114(8): 1804-1826.
［14］王军文，张伟光，李建中.摇摆式预应力混凝土桥墩基于位移的抗震设计方法研究［J］.振动与冲击，2014，33(24)：106-111.
WANG Junwen, ZHANG Weiguang, LI Jianzhong.Study on displacement-based seismic design procedures of rocking bridge piers with posttensioned tendons［J］. Journal of
Vibration and Shock, 2014, 33(24): 106-111.
［15］韩强，贾振雷，何维利，等.自复位双柱式摇摆桥梁抗震设计方法及工程应用［J］.中国公路学报，2017，30(12)：169-177.
HAN Qiang, JIA Zhenlei, HE Weili, et al. Seismic design method and its engineering application of self-centering double-column rocking bridge［J］.China Journal of
Highway and Transport, 2017, 30(12): 169-177.
［16］布占宇，叶晗晖，葛胜良，等.直接基于位移的预制拼装墩柱抗震设计［J］.中国公路学报，2018，31(12)：250-257.
BU Zhanyu, YE Hanhui, GE Shengliang, et al. Seismic resistant design of precast segmental columns using direct displacement based design method［J］.China Journal
of Highway and Transport, 2018, 31(12): 250-257.
［17］杨博雅，吕西林.预应力预制混凝土剪力墙截面设计方法［J］.建筑结构学报，2018，39(2)：79-87.
YANG Boya, LYU Xilin. Design method of prestressed precast concrete shear walls［J］.Journal of Building Structures, 2018, 39(2): 79-87.
［18］ SMITH B J. Design, Analysis and Experimental Evaluation of Hybrid Precast Concrete Shear Walls for Seismic Regions［D］. Indiana: University of Notre Dame,
2012: 30-62.
［19］ Standards Association of New Zealand. Concrete Structures Standard: NZS 3101［S］. Wellington, New Zealand: Standards Association of New Zealand, 2006.
［20］布占宇，占陈文，石鑫磊，等.节段拼装混凝土桥墩抗震性能研究［J］.宁波大学学报(理工版)，2011，24(2)：83-88.
BU Zhanyu, ZHAN Chenwen, SHI Xinlei, et al. Research on seismic resistance of precast segmental concrete bridge piers［J］.Journal of Ningbo University(Natural
Science & Engineering Edition), 2011, 24(2): 83-88.

[1]	周建庭1,2，黎娅2，张洪2，夏润川2，杨文琦2. 基于自发漏磁检测的钢绞线两点腐蚀试验研究[J]. 重庆交通大学学报（自然科学版）, 2021, 40(07): 74-81.
[2]	张华1，张正琦2 ，程高3，4，田伯科1. 黄土地区陡崖坡段桩基合理临坡距研究[J]. 重庆交通大学学报（自然科学版）, 2021, 40(07): 93-98.
[3]	刘金春，宋子轩，梁栋. 单箱三室连续梁桥在横向温度梯度与汽车偏载下的空间效应分析[J]. 重庆交通大学学报（自然科学版）, 2021, 40(06): 80-86.
[4]	郑植1,2，耿波2，袁佩2，李嵩林2，胡正涛3. 桥墩复合材料防船撞装置新型连接试验研究[J]. 重庆交通大学学报（自然科学版）, 2021, 40(05): 66-73.
[5]	张阳1，屈少钦1，卢九章2，霍文斌3. UHPC纤维定向法及对受拉性能影响[J]. 重庆交通大学学报（自然科学版）, 2021, 40(05): 74-80.
[6]	傅立磊. 基于随机激励响应的参数识别相关函数法[J]. 重庆交通大学学报（自然科学版）, 2021, 40(04): 70-75.
[7]	苏小波1，肖林2. 空间刚架结构钢-混结合段合理构造模型试验和数值模拟研究[J]. 重庆交通大学学报（自然科学版）, 2021, 40(04): 76-82.
[8]	梁宗保1，柴洁1，纳守勇2，马天立1，唐玉1. 基于深度学习的桥梁健康监测数据有效性分析[J]. 重庆交通大学学报（自然科学版）, 2021, 40(03): 78-83.
[9]	唐启智1,辛景舟1,2,周建庭1,付雷1,3,张俊4. 基于时序分析的锈蚀RC拱损伤识别：仿真与验证[J]. 重庆交通大学学报（自然科学版）, 2021, 40(02): 69-77.
[10]	戎贤1,2，杨洪渭1，张健新1,2. 带钢端头的装配式混凝土梁柱中节点滞回性能试验研究[J]. 重庆交通大学学报（自然科学版）, 2021, 40(02): 78-82.
[11]	刘小会，许杨，陈思甜，徐略勤. 人行悬索桥地震响应分析[J]. 重庆交通大学学报（自然科学版）, 2021, 40(01): 65-71.
[12]	琚利平1，王银辉2，陆晓宏3，单继栋4. 行车落物作用下钢筋混凝土箱梁破坏形态分析[J]. 重庆交通大学学报（自然科学版）, 2021, 40(01): 72-78.
[13]	武周虎. 一种新型异形椭圆隧道横断面的性质及优化设计[J]. 重庆交通大学学报（自然科学版）, 2021, 40(01): 87-95.
[14]	王桢1,2，周建庭1,3，张劲泉1,4，吴海军1，吴月星1. 现浇分段长度对万吨级平转斜拉桥受力的影响分析[J]. 重庆交通大学学报（自然科学版）, 2020, 39(12): 44-52.
[15]	郝宪武，舒鹏，郝键铭. 大跨度非对称悬索桥的静风稳定性研究[J]. 重庆交通大学学报（自然科学版）, 2020, 39(12): 53-59.

预制节段拼装桥墩受力性能分析与模拟

Analysis and Simulation of Mechanical Performance of Precast Segmental Assembly Piers

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics