中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

重庆交通大学学报(自然科学版) ›› 2020, Vol. 39 ›› Issue (06): 46-52.DOI: 10.3969/j.issn.1674-0696.2020.06.08

• 桥梁与隧道工程 • 上一篇    下一篇

公路弯梁桥模态测试的测点布置

梁栋1,2,张聪正1,陈磊1   

  1. (1. 河北工业大学 土木与交通学院,天津 300401;2. 河北省土木工程技术研究中心,天津 300401)
  • 收稿日期:2019-03-12 修回日期:2019-04-30 出版日期:2020-06-26 发布日期:2020-06-29
  • 作者简介:梁栋(1976—),男,河北南宫人,教授,博士,博士生导师,主要从事桥梁结构方面的研究。E-mail:13622114075@139.com。
  • 基金资助:
    国家自然科学基金项目(50808063);石家庄市交通运输局科技项目(2015016);天津市交通运输委员会科技发展计划项目(2016A-07)

Measure Point Layout of Modal Test of Highway Curved Beam Bridge

LIANG Dong1,2, ZHANG Congzheng1, CHEN Lei1   

  1. (1. School of Civil and Transportation, Hebei University of Technology, Tianjin 300401, China; 2. Civil Engineering Technology Research Center of Hebei Province, Tianjin 300401, China)
  • Received:2019-03-12 Revised:2019-04-30 Online:2020-06-26 Published:2020-06-29

摘要: 为得到测试公路弯梁桥模态振型的测点优化布置方案,采用有效独立法运算测点布置位置,并引入模态保证准则检验测点的准确性。以某实际三跨连续弯梁桥为工程背景,通过MATLAB编制有效独立法寻找相应测点位置的程序,分别计算了前10阶模态的传感器布置测点;计算各阶模态测点的模态向量空间夹角(PMACi值);并选取其中4阶模态进行实桥验证。结果显示:多数PMACi值满足模态保证准则,并且实桥测试结果与有限元模态相似度很高;结果表明:测点布置方案可以运用到三跨连续弯梁桥的模态测试中,有效独立法能有效为公路弯梁桥在环境激励下开展模态测试提供测点布置参考。

关键词: 桥梁工程, 模态测试, 测点优化布置, 有效独立法, 弯梁桥, 环境激励

Abstract: In order to obtain the optimal layout of the measuring points for testing the modal shape of the highway curved beam bridge, the effective independent method was used to calculate the layout position of measuring points, and the modal assurance criterion was introduced to check the accuracy of the measuring points. Taking an actual three-span continuous curved beam bridge as an engineering background, the program of finding the location of corresponding measuring points by the effective independent method was compiled by MATLAB, and the sensor arrangement measuring points of the first 10 modes were calculated respectively. The angle of the modal vector space (PMACi value) of each modal measuring point was calculated, and four modes among them were selected for real bridge verification. The results show that most of the PMACi values meet the modal assurance criterion, and the results of real bridge test are very similar to those of the finite element modal, which indicates that the proposed scheme of measuring point arrangement can be applied to the modal test of three-span continuous curved beam bridge, and the effective independent method can effectively provide a reference for the measuring point layout of modal test of highway curved beam bridge under environmental excitation.

Key words: bridge engineering, modal test, optimal layout of measuring point, effective independent method, curved beam bridge, ambient excitation

中图分类号: