基于Bezier曲线法对径流式涡轮机动叶的设计

doi:10.3969/j.issn.1674-0696.2013.03.31

重庆交通大学学报（自然科学版） ›› 2013, Vol. 32 ›› Issue (3): 502-505.DOI: 10.3969/j.issn.1674-0696.2013.03.31

基于Bezier曲线法对径流式涡轮机动叶的设计

李军，蒋睿

重庆交通大学机电与汽车工程学院，重庆400074

收稿日期:2012-06-30 修回日期:2012-09-03 出版日期:2013-06-15 发布日期:2015-03-12
作者简介:李军(1964—)，男，重庆人，教授，主要从事汽车发动机排放与控制方面的研究。E-mail:jiangrui0725an@126.com。
基金资助:
重庆市教委自然科学基金项目( KJ090408) ; 重庆市教委项目( 0903070)

Design of the Turbine Rotor Blade Based on Bezier Curve Method

Li Jun，Jiang Rui

School of Mechanical ＆ Automotive engineering，Chongqing Jiaotong University，Chongqing 400074，China

Received:2012-06-30 Revised:2012-09-03 Online:2013-06-15 Published:2015-03-12

摘要/Abstract

摘要： 根据叶轮初步设计公式，结合Bezier曲线构造方法依靠NUMECA软件Design3D模块以径流向心式涡轮机效率0.5为目标值，对叶轮子午面型线以及动叶型线进行设计。并通过NUMECA软件对所设计的叶片以及子午流面进行流体计算，得出了符合效率目标值的叶型和子午流面参数，以及子午流面的绝对温度和绝对压力的分布，提出了以径流向心式涡轮机效率为目标值，结合Bezier曲线构造法的叶片型线和子午流面型线的设计方法。

关键词: Bezier曲线, 子午流面, 涡轮机, Numeca

Abstract: According to the preliminary design formula of turbine and Bezier curve construction method，the meridian surface shape and the blade profile is designed by NUMECA software Design3D module，which takes the runoff radial-inward turbine efficiency of 0. 5 as the target value. Hydrodynamic mechanics calculation is carried out on the blade and the meridian surface，which is designed on the basis of the NUMECA software. The parameters of the blade type and the efficiency target value are obtained，and the distribution of the absolute temperature and absolute pressure of medicinal surface is also obtained. The runoff radial-inward turbine efficiency is taken as the target value，and the design methods of blade profile and medicinal surface line is proposed，combining with Bezier curve construction method.

Key words: Beziercurves, meridiansurface, turbo, Numeca

中图分类号:

U464.11^+⁵

李军，蒋睿. 基于Bezier曲线法对径流式涡轮机动叶的设计[J]. 重庆交通大学学报（自然科学版）, 2013, 32(3): 502-505.

Li Jun，Jiang Rui. Design of the Turbine Rotor Blade Based on Bezier Curve Method[J]. Journal of Chongqing Jiaotong University(Natural Science), 2013, 32(3): 502-505.

参考文献

[1]杨策. 径流式叶轮机械理论及设计[M]. 北京: 国防工业出版社,2004.
Yang Ce. Theory and Design of Radial Flow Turbo Machinery [M].Beijing: National Defense Industry Press,2004.
[2]李磊,李元生,于明. 基于Z-θ 流面的径流式叶片中弧线造型设计方法[J]. 机械工业学报, 2012, 48(5) : 5-8.
Li Lei,Li Yuansheng,Yu Ming. Based on the Z-θ flow surface runoff type blade camber design method[J]. Journal of Thermal Industry,2012, 48(5) : 5-8.
[3]Shan Peng,Dieter B,Ren Jing,et al. Parameter survey of thermally highly loaded,porous and cooled multi-layer systems for turbo blades[J]. Journal of Thermal Science,2009,2: 181-185.
[4]张人会,杨军虎,李仁年. 离心泵叶轮的参数化设计[J]. 排灌机械,2009,27(5) : 6-7.
Zhang Renhui,Yang Junhu. Li Renlian. Parametric design of centrifugal pump blade[J]. Drainage and Irrigation Machinery,2009,27(5) : 6-7.
[5]Yang Lianqiang,Zeng Xiaoming. Bezier curves and surfaces with shape [J]. International Journal of Computer Mathematics,2009,12(7) : 9-11.
[6]Choi J W,Curry R,Elkaim G. Piecewise Bezier Curves Path Planningwith Continuous Curvature Constraint for Autonomous Driving[M]/ /Ao S L,Rieger B,Amouzegar M A. Machine learning ＆ systems Engineering. Nether land: Springer Netherlands,2009.
[7]Muhammad M S,Choi T. A novel method for shape from focus in microscopy using Bezier surface approximation[J]. Mircrocopy Research and Technique,2009,2(7) : 12-15.
[8]单晓亮. 复速级涡轮机叶片强度分析[J]. 中国制造业信息化,2008,2(5) : 2-3
Shan Xiaoliang. Analysis of the stress intensity of vanes of 2-stage turbine[J]. Manufacturing Information Engineering of China,2008,2(5) : 2-3.
[9]Haddad S,Baghdadi A,Jezequel M. On the convergence speed of turbo demodulation with turbo decoding[J]. IEEE,2012,60 (8 ) :4452-4458.

基于Bezier曲线法对径流式涡轮机动叶的设计

Design of the Turbine Rotor Blade Based on Bezier Curve Method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics