船闸输水系统水动力学研究综述

doi:10.3969/j.issn.1674-0696.2013.01.36

摘要/Abstract

摘要： 基于国内外大量研究资料,从船闸输水系统水动力学研究方法、船闸输水系统消能设施、船闸输水系统空蚀空化和闸室船舶系缆力研究等方面对船闸输水系统水动力学的研究进行了系统论述和评析,并对船闸输水系流水动力系的研究前景进行了探讨。

Abstract: Based on the large amount of research achievements at home and abroad，the studies on the lock filling and emptying system were systemly expatiated and analyzed by the research methods on lock filling and emptying system，lock energy dissipater，cavitation and in-chamber ship’s mooring forces． Moreover，the issues to be researched and settled have been discussed．

Key words: lock, filling and emptying system, hydrodynamics, energy dissipator, mooring forces

中图分类号:

U641.1

陈明，宣国祥，陈明栋. 船闸输水系统水动力学研究综述[J]. 重庆交通大学学报（自然科学版）, 2013, 32(1): 157-160.

Chen Ming,Xuan Guoxiang,Chen Mingdong. Review of Hydrodynamics of Lock Filling and Emptying System[J]. Journal of Chongqing Jiaotong University(Natural Science), 2013, 32(1): 157-160.

参考文献

[1]Б.Д.卡洽诺夫斯基.船闸水力学［M］.北京: 水利出版社， 1957．
Б.Д.Caccia Malinowski.Lock Hydraulics ［M］.Beijing: Hy- 第1 期陈明，等: 船闸输水系统水动力学研究综述 159 draulic Press，1997．
[2]Kolkman P A.Low-Head Navigation Lock Door Filling and Emptying Systems Developed Hydraulic Investigation［M］.Delft，Netherlands: Delft Hydraulics Laboratory，1973．
[3]西德运河交通工程考察报告［R］.北京: 交通部赴西德运河交流工程考察小组，1 978．
West Germany Canal Traffic Engineering Investigation Report ［R］.Beijing: The Ministry of Transport Invetigation Team to West Germany Canal Engineering Communication， 1978．
[4]Ables J H，Boyd M B.Filling and Emptying System Cannelton Main Lock，Ohio River，and Generalized Tests of Sidewall Port Systems for 110-by 1200-ft Locks.Hydraulic Model Investigation ［R］.Vicksburg: U.S.Army Engineer Waterways Experiments Station，1966: 2-713．
[5]Hite J E.Model Study of Marmet Lock Filling and Emptying System， Kanawha River［R］.Vicksburg: U.S.Army Engineer Waterways Engineer Station，1999．
[6]Pickett E B，Neilson F M.Lock Hydraulic System Model and Prototype Study Data［R］.Vicksburg: U.S.Army Engineer Waterways Experiment Station，1988．
[7]Division Hydraulic Laboratory.Navigation Lock for Lower Granite Dam Snake River，Washington; Hydraulic Model Investigation ［R］.Bonneville: U.S.Army Engineer Division，1979．
[8]George J F.Filling and Emptying System，Water Bouldin Lock， and Lock Culvert Valve for Coosa River Waterway［R］.Vicksburg: U.S.Army Engineer Waterways Engineer Station，1984．
[9]Hite J E.In-Chamber Longitudinal Culvert Design for Lock Filling and Emptying System［R］.Vicksburg: U.S.Army Engineer Waterways Engineer Station，2003．
[10]陈泰春.葛洲坝1 号船闸输水系统水力学模型试验研究［J］．水利水运科学研究， 1990( 1) : 11-21．
Chen Taichun.Hydraulic model tests on filling and emptying system of Gezhouba 1st lock［J］.Hydro-Science and Engineering， 1990( 1) : 11-21．
[11]黄岳，宣国祥，张瑞凯.船闸水力学试验数据采集处理系统［J］.水利水运科学研究，1 996 ( 1) : 70-75．
Huang Yue，Xuan Guoxiang，Zhang Ruikai.Data collecting and analyzing system for hydraulic model test of ship locks［J］.Hydro- Science and Engineering，1996 ( 1) : 70-75．
[12]李云，胡亚安，宣国祥.通航船闸水力学研究进展［J］.水动力学研究与进展A 辑，1 999，14( 2) : 232-238．
Li Yun，Hu Yaan，Xuan Guoxiang.Advances in study on hydraulics of navigation lock［J］.Journal of Hydrodynamics in A Series， 1999，14( 2) : 232-238．
[13]JTJ 26l—266 船闸设计规范( 试行) ［S］.北京: 人民交通出版社，1 987．
JTJ 261—266 Shiplock Design Code ( Trial Implementation) ［S］． Beijing: China Communications Press，1987．
[14]刘宝军.超高水头船闸消能工型式及消能效果对比研究［D］．重庆: 重庆交通大学，2 006．
Liu Baojun.Comparative Study on Energy Dissipater Type and Energy Dissipation Effect ［D］.Chongqing: Chongqing Jiaotong University， 2006．
[15]黎贤访.船闸分散输水系统闸室水动力学研究［D］.南京: 南京水利科学研究院， 2010．
Li Xianfang.Study on Hydrodynamics of Lock Chamber of Longitudinal Filling and Emptying System for Navigation Lock［D］.Nanjing: Nanjing Hydraulic Research Institute，2010．
[16]刘平昌，周家俞，王召兵，等.渠江金盘子船闸输水系统水力学原型观测研究［J］.重庆交通大学学报: 自然科学版，2 011，30 ( 6) : 1396-1399．
Liu Pingchang，Zhou Jiayu，Wang Zhaobing，et al.Hydraulics prototype observation on conveyance system of the Jinpanzi power station in Qujiang river［J］.Journal of Chongqing Jiaotong University: Natural Science，2011，30( 6) : 1396-1399．
[17]李云，徐新敏，魏文炜.三峡临时船闸人字门运行方式原型观测［J］.水利水运工程学报，2 003 ( 2) : 29-35．
Li Yun，Xu Xinmin，Wei Wenwei.Prototype tests on operating manner of miter gates in Three-Gorge temporary shiplock［J］． Hydro-Science and Engineering，2003 ( 2) : 29-35．
[18]胡亚安，郑楚佩，卞兆盛.葛洲坝1 号船闸阀门门楣通气设施原型观测研究［J］.水运工程， 1995( 6) : 28-32．
Hu Yaan，Zheng Chupei，Bian Zhaosheng.Prototype tests on natural aeration measures of Gezhouba No.1 Shiplock valve［J］.Port ＆ Waterway Engineering，1995( 6) : 28-32．
[19]骆少泽，樊宝康，胡亚安.三峡船闸输水阀门动特性研究［J］．工程力学，2 009( 增刊1) : 185-188．
Luo Shaoze，Fan Baokang，Hu Yaan.Study on dynamic characteristics for delivery gate of lock of the Three-Gorge project［J］.Engineering Machanics，2009( Suppl1) : 185-188．
[20]U.S.Army Engineer Waterways Experiment Station.Lock Filling and Emptying Symmetrical System［R］.U.S．: ［s.n．］1981．
[21]Stockstill，Richak'd L，Neilson F M，et al.Hydraulic calculations for flow in lock manifolds［J］.Journal of Hydraulic Engineering， 1991，1 17( 8) : 1026-1041．
[22]Hammack E A，Stockstill R L.3D numerical modeling of John Day lock tainter valves［C］.ASCE: World Environmental and Water Resources Congress: Great Rivers，2009 : 2727-2736．
[23]Stockstill R L，Berger R C.A three-dimensional numerical model for flow in a lock filling system［C］.ASCE: World Environmental and Water Resources Congress: Great Rivers，2009: 2737-2746．
[24]N.M.德乌斯.通航船闸［M］.大连: 大连工学院出版社， 1988．
DE UZ N M.Navigation Lock ［M］.Dalian: Dalian Institute Press，1988．
[25]张瑞凯，宣国祥.带调节水池船闸水力计算数学模型［J］.水利水运科学研究，1 995( 1) : 33-41．
Zhang Ruikai，Xuan Guoxiang.Numerical model of hydraulic calculation for lock with regulation ponds［J］.Hydro-Science and Engineering， 1995( 1) : 33-41．
[26]杨朝东.船闸复杂输水系统输水数学模型及应用研究［D］.南京: 南京水利科学研究院， 1997．
Yang Chaodong.Study on Mathematic Model and Application of Complex Filling and Emptying System for Navigation Lock ［D］． Nanjing: Nanjing Hydraulic Research lnstitute，1997．
[27]郑宝友，李金合.船闸输水系统水力计算程序［J］.水道港口， 1986 ( 4) : 17-24．
Zheng Baoyou，Li Jinhe.Hydraulic calculation program［J］.Journal of Waterway and Harbor，1986 ( 4) : 17-24．
[28]宣国祥，张瑞凯，宗慕伟.单级船闸输水系统分析及水力计算软件包［J］.水利水运科学研究，1 994( 1 /2) : 61-69．
Xuan Guoxiang，Zhang Ruikai，Zong Muwei.A hydraulic analysis and calculation software for single lift lock filling and emptying system ［J］.Hydro-Science and Engineering，1994( 1 /2) : 61-69．
[29]王玲玲，戴会超，王琼.三峡船闸水力学数值实验室的研制及应用［J］.河海大学学报: 自然科学版， 2004，32( 1) : 100-103．
Wang Lingling，Dai Huichao，Wang Qiong.Development of hydraulics numerical laboratory and its application to Three Gorges project［J］.Journal of Hohai University: Natural Science，2004， 32( 1) : 100-103．
[30]王智娟，江耀祖，吴英卓，等.银盘船闸阀门段体型优化三维数值模拟研究［J］.人民长江，2 008，39( 4) : 91-93．
Wang Zhijuan，Jiang Yaozu，Wu Yingzhuo，et al.The 3D numerical simulation study on valve pattern optimization for Yinpan lock ［J］.Yangtz River，2008，39( 4) : 91-93．
［31］马峥，张计光，陈红勋，等.三峡永久船闸输水廊道水动力学特性研究［J］.水动力学研究与进展( A 辑) ，2007，22 ( 2) : 175- 181．
Ma Zheng，Zhang Jiguang，Chen Hongxun，et al.Hydrodynamic study on water-filling tunnel of the Three Gorges Lock［J］.Journal of Hydrodynamics: A series，2007，22( 2) : 175-181．
［32］张利鹏.高水头船闸水流三维数值模拟研究［D］.重庆: 重庆交通大学， 2008．
Zhang Lipeng.The 3D Flow Numerical Simulation Study on Highlift Lock ［D］.Chongqing: Chongqing Jiaotong University，2008．
［33］杨忠超，杨斌，陈明栋，等.高水头船闸阀门开启过程水力特性仿真研究［J］.重庆交通大学学报: 自然科学版， 2009，28( 4) : 758-762．
Yang Zhongchao，Yang Bin，Chen Mingdong，et al.Simulation study on hydraulics characteristic of high head lock during valve opening process based on dynamic mesh technology［J］.Journal of Chongqing Jiaotong University: Natural Science，2009，28 ( 4 ) : 758-762．
［34］李洪奇.高水头船闸阀门启闭过程及体型优化三维数值模拟研究［D］.重庆: 重庆交通大学， 2009．
Li Hongqi.The 3D Numerical Simulation Study on High Head Lock Valves Opening and Closing Process and Pattem Optimization ［D］． Chongqing: Chongqing Jiaotong University，2009．
［35］ Ables，Jackson H.Filling and emptying system for Bay Springs Lock Tmnnessee-Tombigee Waterway ［R］，Mississippi: Hydraulic Model Investigation，1978．
［36］连恒铎.倒口出流消能技术在船闸集中输水系统设计中的应用［J］.水运工程，1 996( 4) : 15-18．
Lian Hengduo.The stilling technique of inverted outlet flow in design of concentrated filling and emptying system of shiplock［J］． Port ＆ Waterway Engineering，1996( 4) : 15-18．
［37］刘本芹，宗慕伟，宣国祥.可不设镇静段的船闸集中输水系统研究［J］.水运工程， 2008 ( 11) : 139 -143．
Liu Benqin，Zong Muwei，Xuan Guoxiang.Study on lock’s concentrated filling ＆ emptying system with no need of mitigative segment ［J］.Port ＆ Waterway Engineering，2008 ( 11) : 139-143．
［38］胡亚安，张瑞凯.三峡船闸底扩与顶扩体型水力特性综合研究［J］.水科学进展， 1998，9 ( 2) : 164 -169．
Hu Yaan，Zhang Ruikai.Synthetic research on hydraulic characteristics of culvert shapes behind valve for Three Gorges shiplock［J］． Advances in Water Science，1998，9 ( 2) : 164-169．
［39］梁川，谢省宗.三峡船闸输水隧洞反弧门后廊道体型空化模型试验［J］.四川大学学报: 工程科学版，2 000，12 ( 2) : 4-7．
Liang Chuan，Xie Shengzong.Study on cavitation experiment of gallery shape back of ogee gate of lock water conveyance tunnel in Three Gorges［J］.Journal of Sichuan University: Engineering Science， 2000，12 ( 2) : 4-7．
［40］ JTJ 306—2001 船闸输水系统设计规范［S］.北京: 人民交通出版社，2 011．
JTJ306—2001 Design Code of Filling and Emptying System for Shiplocks ［S］.Beijing: China Communications Press， 2011．
［41］ Richard L S.Modeling Hydrodynamic Forces on Vessels During Navigation Lock Operations［C］.ASCE: Hydraulic Measurements and Experimental Methods，2004．
［42］ Stockstill R L.Mooring model coefficients for barge tows in a navigation lock［J］.Journal of Waterway Port，Coastal and Ocean Engineering， 2003，129( 5) : 233-236．