[1] 万一品,宋绪丁,贾洁.大型装载机湿式驱动桥桥壳有限元分析[J].起重运输机械,2015(3):47-49.
WAN Yiping, SONG Xuding, JIA Jie. The finite element of the wet drive bridge of the large loading machine [J].Hoisting and Conveying Machinery, 2015 (3):47-49.
[2] 周海超,翟辉辉,杨建.基于ADAMS的传动轴-桥壳系统的振动分析[J].重庆交通大学学报(自然科学版),2016,35(2):174- 178.
ZHOU Haichao, ZHAI Huihui, YANG Jian. Propeller shaft and rear axle housing system vibration analysis based on ADAMS [J]. Journal of Chongqing Jiaotong University (Natural Science), 2016,35(2):174-178.
[3] SHAO Yimin, LIU Jing, MECHEFSKE C K. Drive axle housing failure analysis of a mining dump truck based on the load spectrum[J]. Engineering Failure Analysis, 2011, 18(3):1049-1057.
[4] 刘为,薛克敏,李萍,等.汽车驱动桥壳的有限元分析和优化[J].汽车工程,2012,34(6):523-527.
LIU Wei, XUE Kemin, LI Ping, et al. FE analysis and optimization of vehicle drive axle housing[J]. Automotive Engineering, 2012,34(6):523-527.
[5] GAO Jing, SONG Jian, ZHANG Buliang, et al. Prediction on fatigue life of vehicles driving axle house based on MSC fatigue [J]. Journal of Engineering Design, 2007, 14(3):210-214.
[6] 周军超,田建平,郭翠霞,等.基于有限元方法与盲数理论某型全地形车辆桥壳设计研究[J].机械传动,2015,39(9):93- 96.
ZHOU Junchao, TIAN Jianping, GUO Cuixia, et al. Design research of ATV axle housing based on blind number theory and FEA method[J].Journal of Mechanical Transmission, 2015,39(9):93-96.
[7] YU Xianzhong, JIE Gang, HUANG Pinghui, et al. Fatigue life prediction of driving axle housing assemble based on FEA[J]. Advanced Materials Research, 2011, 179/180:1217-1222.
[8] 郭冬青,张翠平,杨辉,等.驱动桥壳的试验模态分析及优化设计[J].机械设计与制造,2015 (1):211-216.
GUO Dongqing, ZHANG Cuiping, YANG Hui, et al. Experimental modal analysis and optimization design of drive axle housing[J]. Mechanical Design & Manufacture, 2015(1):211-216.
[9] 孙忠云,王显会.某型汽车驱动桥壳可靠性优化设计[J].科学技术与工程,2011,11(16):3580-3583.
SUN Zhongyun, WANG Xianhui. Reliability-based optimization and design of a certain type of automobile driving axle shell[J]. Science Technology and Engineering, 2011,11(16): 3580-3583.
[10] 吕国坤,陈黎卿,王亮,等.基于遗传算法-响应曲面法的驱动桥桥壳轻量化设计[J].机械设计,2013,30(10):50-55.
LV Guokun, CHEN Liqing, WANG Liang, et al. Lightweight design of drive axle shell based on genetic algorithm and response surface method[J].Journal of Machine Design, 2013,30(10):50-55.
[12] 于海莲,王永泉,陈花玲,等.响应面模型与多目标遗传算法相结合的机床立柱参数优化[J]. 西安交通大学学报,2012, 46(11):80-85.
YU Hailia, WANG Yongquan, CHEN Hualing, et al. Optimization for machine tool column combiningresponse surface with multi-objective genetic algorithm[J].Journal of Xian Jiaotong University, 2014, 46(11):80-85.
[13] 周萍,于德介,臧献国,等.采用响应面法的汽车转向系统固有频率优化[J].汽车工程,2010,32(10):883-887.
ZHOU Ping, YU Dejie, ZANG Xianguo, et al. Optimization of the natural frequency of vehicle steering system using response surface method[J].Automobile Engineering, 2010,32(10):883-887.
[14] 邓乃上,方宗德,朱艳香,等.基于响应面模型的汽车传动系参数多目标优化[J].机械科学与技术,2011,30(9):1569- 1572.
DENG Naishang, FANG Zongde, ZHU Yanxiang, et al. Multi-objective optimization of heavy-duty truck transmission parameters based on response surface model[J].Mechanical Science and Technology for Aerospace Engineering, 2011,30 (9):1569-1572.
[15] 毛国辉,王小松,郑鸿飞.车-桥耦合振动的联合方程分析方法[J].重庆交通大学学报(自然科学版),2013,32(1):1-4.
MAO Guohui,WANG Xiaosong, ZHENG Hongfei.Analytical method forjoint equation of vehicle-bridge coupling vibration[J] .Journal of Chongqing Jiaotong University(Natural Science), 2013,32(1):1-4.
[16] 桂水荣,张超,陈水生.车桥耦合振动缩尺模型试验的相似律研究[J].重庆交通大学学报(自然科学版),2015,34(2):10- 14.
GUI Shuirong,ZHANG Chao,CHEN Shuisheng.Similarity law of scale-model test system for vehicle-bridge coupling vibration[J]. Journal of Chongqing Jiaotong University(Natural Science), 2015,34(2):10-14.
[17] 路怀华,于德介,吕辉.基于响应面法的汽车转向系统可靠性优化[J].汽车工程,2015,37(1):102-106.
LU Huaihua, YU Dejie, LV Hui. Reliability optimization of vehicle steering system based on response surface method[J ]. Automotive Engineering, 2015,37(1):102-106. |