中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊
重庆交通大学学报（自然科学版）

重庆交通大学学报（自然科学版） ›› 2014, Vol. 33 ›› Issue (5): 161-164.DOI: 10.3969/j.issn.1674-0696.2014.05.35

• • 上一篇    下一篇

一种轮鼓试验台等效转动惯量估算方法

何常源，朱茂桃，王国林，张树培，黄璇   

  1. 江苏大学 汽车与交通工程学院，江苏 镇江 212013
  • 收稿日期:2013-01-21 修回日期:2014-01-15 出版日期:2014-10-15 发布日期:2015-03-10
  • 作者简介:何常源（1988—），男，辽宁沈阳人，硕士，主要从事汽车检测方面的研究。E-mail:hechangyuan@126.com。
  • 基金资助:
    国家“863”基金项目（1831120030）

A Method for Estimating Equivalent Rotational Inertia of Chassis Dynamometer

He Changyuan, Zhu Maotao, Wang Guolin , Zhang Shupei, Huang Xuan   

  1. School of Automobile & Traffic Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu, China
  • Received:2013-01-21 Revised:2014-01-15 Online:2014-10-15 Published:2015-03-10

PDF

摘要： 为了使车辆在转鼓试验台上的制动过程与路试的制动过程尽可能一致，需要估算的等效转动惯量尽量接近真实值。考虑了制动过程中车辆的轴荷前移及转动半径的选取，提出了一种等效转动惯量的估算方法。该方法针对车辆制动时前轴等效惯量的计算，使用在车辆的单轴转鼓实验中，适用于电动汽车制动能量回收过程的研究。通过台架实验与实车路试结果进行对比，证明了该方法的有效性。

关键词: 车辆工程, 转动惯量, 制动, 轴荷, 质心

Abstract: In order to make the vehicles’ braking process on Chassis Dynamometer platform as far as possible consistent with that on the road, the estimation of equivalent rotational inertia was required to be as far as possible close to the true value. Considering redistribution of vehicle axle load in the braking process and selection of turning radius, a method for estimating equivalent rotational inertia was put forward. The proposed method was used for the calculation of front axle equivalent inertia and used for two wheel drum experiment, which was suitable for the analysis on electric vehicle braking energy recovery process. Through the comparison of results of bench experiment and real vehicle road test, the results prove the validity of the proposed method.

Key words: vehical engineering;rotational inertia, braking, axle load, center of mass

中图分类号: