[1] 同济大学. 城市道路交叉口规划规范:GB 50647-2011[S]. 北京: 中国计划出版社, 2011.
Tongji University. Code for Planning of Intersections on Urban Roads:GB 50647-2011[S].Beijing:China Planning Press, 2011.
[2] 陈洪仁, 杨龙海, 李丽兰. 基于速度和车头时距的车辆换算系数计算方法研究[J]. 哈尔滨建筑大学学报,2001,34(2):110-114.
CHEN Hongren, YANG Longhai, LI Lilan. Analysis of vehicle conversion factor[J]. Journal of Harbin University of Civil Ehgineering & Architecture,2001,34(2):110-114.
[3] 中交第一公路勘察设计研究院.公路路线设计规范:JTG D20 2006[S]. 北京: 人民交通出版社, 2006.
CCCC First Highway Consultants Co., Ltd..Design Specification for Highway Alignment:JTG D20 2006[S]. Beijing: China Communications Press, 2006.
[4] Transportation Rsearch Board. Highway Capacity Manual 2000[S]. Washington, D.C.: National Research Council, 2000.
[5] 陈锦秀, 陈小鸿, 林航飞. 《城市道路平面交叉口规划与设计规程》基本饱和流量与大车校正系数检验研究[J]. 城市交通,2004,2(3):17-20.
CHEN Jinxiu, CHEN Xiaohong, LIN Hangfei. Research on verifying base saturation flow and heavy vehicle adjust factor in design rugulation for at-grade intersections on urban street[J]. Urban Transport of China,2004,02(03):17-20.
[6] 王殿海, 杨少辉, 景春光. 累计曲线法计算饱和流率和相位损失时间[J]. 交通运输工程学报,2003,3(3):75-78.
WANG Dianhai, YANG Shaohui, JING Chunguang. Cumulative curve method for calculating saturation flow rate and phase lost time[J]. Journal of Traffic and Transportation Engineering, 2003, 3(3):75-78.
[7] PTV. VISSIM 4.30 User Manual[M]. Karlsruhe: Plannning Transport Verkeher AG, 2007.
[8] 罗美清, 隽志才. VISSIM在交叉口交通设计与运行分析中的应用[J]. 武汉理工大学学报(交通科学与工程版),2004,28(2):232-235.
LUO Meiqing, JUAN Zhicai. Application of VISSIM to transportation design and operation analysis of intersection[J]. Journal of Wuhan University of Technology (Transportation Science & Engineering),2004,28(2):232-235.
[9] 孙剑, 杨晓光, 刘好德. 微观交通仿真系统参数校正研究[J]. 系统仿真学报,2007,19(1):48-50.
SUN Jian, YANG Xiaoguang, LIU Haode. Study on microscopic traffic simulation model systematic parameter calibration[J]. Journal of System Simulation, 2007, 19(1):48-50.
[10]杜攀峰, 金双泉, 李嘉. 高速公路路段通行能力仿真研究[J]. 湖南大学学报(自然科学版),2009,36(6):7-12.
DU Panfeng, JIN Shuangquan, LI Jia. Simulation analysis of expressway capacity[J]. Journal of Hunan University(Natural Science),2009,36(6):7-12.
[11]李志明, 闫小勇. 基于遗传算法的交通仿真模型参数校正方法研究[J]. 交通标准化,2006(4):21-23.
LI Zhiming, YAN Xiaoyong. Study on correction method of traffic simulation model based on genetic algorithm[J]. Communications Standardization,2006(4):21-23.
[12]吴志洲, 范宇杰, 张剑桥. 考虑集卡影响的上匝道合流区通行能力模型[J].同济大学学报(自然科学版),2013,41(5):670-675.
WU Zhizhou, FAN Yujie, ZHANG Jianqiao. Model of merge capacity under impact of container trucks[J]. Journal of Tongji University(Natural Science),2013,41(5):670-675. |