Application of UAV Airborne LiDAR and BIM Technology in Design of
Complex Terrain Highway

doi:10.3969/j.issn.1674-0696.2021.12.12

Journal of Chongqing Jiaotong University(Natural Science) ›› 2021, Vol. 40 ›› Issue (12): 77-81.DOI: 10.3969/j.issn.1674-0696.2021.12.12

• Transportation Infrastructure Engineering • Previous Articles

Application of UAV Airborne LiDAR and BIM Technology in Design of Complex Terrain Highway

XIANG Shiyao, XU Run, YAO Shoufeng, ZHANG Tao, WANG Yitong

(Research and Development Center of Life Cycle BIM Technologies Application, Shandong Provincial Communications Planning and Design Institute Group Co., Ltd., Jinan 250031, Shandong, China)

Received:2020-04-10 Revised:2020-05-25 Published:2021-12-27

基于无人机机载LiDAR与BIM技术在复杂地形公路设计中的应用

相诗尧，徐润，姚守峰，张涛，王奕彤

(山东省交通规划设计院集团有限公司全寿命周期BIM技术应用研发中心，山东济南 250031)

作者简介:相诗尧（1989—），男，山东商河人，高级工程师，博士，主要从事公路勘测和BIM设计方面的研究。E-mail：xiangshiyao1989@163.com
基金资助:
交通运输部交通运输行业重点科技项目（2019-ZD2-009）；山东高速集团有限公司B类科技计划项目（2017QL34）；山东省交通规划设计院科技创新项目（KJ2018SJY01；KJ2017SJY01）

Abstract

Abstract: According to the characteristics of highway design in complex terrain areas, the UAV airborne LiDAR and BIM technology were combined and applied to highway design, which could solve the problem of difficult acquisition of basic geographic data and verify the rationality of the design scheme and the matching degree with the environment through three-dimensional BIM design. The specific application shows that the proposed technical method has obvious advantages in highway design in complex terrain, and is helpful to improve the quality of survey and design.

Key words: highway engineering; highway design; complex terrain; UAV; LiDAR; BIM

摘要： 针对复杂地形区域公路设计的特点，将无人机机载LiDAR与BIM技术结合应用于复杂地形区域的公路设计中，既可解决基础地理信息数据获取困难的问题，又能通过三维BIM设计手段验证方案的合理性及与现场环境的匹配程度。通过具体实例表明：该技术方法在复杂地形公路设计中优势明显，有助于提高勘测与设计质量。

关键词: 道路工程；公路设计；复杂地形；无人机；LiDAR；BIM

CLC Number:

U412.24+5

XIANG Shiyao, XU Run, YAO Shoufeng, ZHANG Tao, WANG Yitong. Application of UAV Airborne LiDAR and BIM Technology in Design of Complex Terrain Highway[J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(12): 77-81.

相诗尧，徐润，姚守峰，张涛，王奕彤. 基于无人机机载LiDAR与BIM技术在复杂地形公路设计中的应用[J]. 重庆交通大学学报（自然科学版）, 2021, 40(12): 77-81.

References

［1］严慧敏.数字正射影像结合LiDAR数据在山区测绘中的应用［J］.测绘通报，2020(1)：115-119.
YAN Huimin. Application of digital orthophoto image combined with LiDAR data in mountain surveying［J］. Bulletin of Surveying and Mapping, 2020(1): 115-119.
［2］许宝华，刘世振.机载LiDAR测量技术在潮间带测量中的应用［J］.人民长江，2019，50(11)：95-98.
XU Baohua, LIU Shizhen. Application of airborne LiDAR measurement technology in intertidal zone measurement［J］. Yangtze River, 2019, 50(11): 95-98.
［3］张永庭，徐友宁，梁伟，等.基于无人机载LiDAR的采煤沉陷监测技术方法——以宁东煤矿基地马连台煤矿为例［J］.地质通报，2018，37(12)： 2270-2277.
ZHANG Yongting, XU Youning, LIANG Wei, et al. Technical methods for colliery subsidence disaster monitoring using UAV LiDAR: A case study of the Maliantai colliery,
Ningdong coal base, Ningxia［J］. Geological Bulletin of China, 2018, 37(12): 2270-2277.
［4］ CARBONARI A, MESSI L, NATICCHIA B, et, al. Development of a BIM-based holonic system for real-time monitoring of building operational efficiency［J］. Frontiers
of Engineering Management, 2020, 7(4): 89-103.
［5］孙建诚，蒋浩鹏，杨文伟，等.基于BIM的三维参数化桥梁标准建模方法研究［J］.重庆交通大学学报(自然科学版)，2019，38(10)：19-24.
SUN Jiancheng, JIANG Haopeng, YANG Wenwei, et al. Method of three-dimensional parametric bridge standard modeling based on BIM technology［J］. Journal of
Chongqing Jiaotong University( Natural Science), 2019, 38(10): 19-24.
［6］钟凯，肖林，王晓强，等.BIM技术在玉溪海绵城市建设中的应用［J］.中国给水排水，2019，35(12)：108-111.
ZHONG Kai, XIAO Lin, WANG Xiaoqiang, et al. Application of BIM technology in the construction of Yuxi sponge city［J］. China Water & Wastewater, 2019, 35(12): 108-
111.
［7］韩达光，秦国成，周银，等.基于BIM和三维激光扫描在基坑监测中的应用［J］.重庆交通大学学报(自然科学版)，2019，38(6)：72-76.
HAN Daguang, QIN Guocheng, ZHOU Yin, et al. Application of BIM and 3D laser scanning in foundation pit monitoring［J］. Journal of Chongqing Jiaotong University(
Natural Science), 2019, 38(6): 72-76.
［8］姚娟，周远舟.基于大数据技术的机载激光雷达点云分类与建模研究［J］.激光杂志，2019，40(12)：155-158.
YAO Juan, ZHOU Yuanzhou. Classification and modeling of airborne lidar point clouds based on big data technology［J］. Laser Journal, 2019, 40(12): 155-158.
［9］陈竹安，施陈敬，冯祥瑞，等.低空多旋翼无人机航测在秀美乡村规划建设中的应用［J］.测绘通报，2019(8)：144-148.
CHEN Zhuan, SHI Chenjing, FENG Xiangrui, et al. Application of aerial survey of low-altitude multi-rotor UAV in beautiful rural planning and construction［J］. Bulletin
of Surveying and Mapping, 2019(8): 144-148.
［10］钱业宏.采用布尔莎模型实现批量AutoCAD数据坐标转换［J］.测绘与空间地理信息，2019，42(11)：223-225.
QIAN Yehong. Using bursa model to realize coordinate transformation of batch AutoCAD data［J］. Geomatics & Spatial Information Technology, 2019, 42(11): 223-225.
［11］方程喜，隋立春，朱海雄.用于公路勘测设计的LiDAR点云抽稀算法［J］.测绘通报，2017(10)：58-61.
FANG Chengxi, SUI Lichun, ZHU Haixiong. LiDAR point cloud thinning algorithm for road survey and design［J］. Bulletin of Surveying and Mapping, 2017(10): 58-61.

Application of UAV Airborne LiDAR and BIM Technology in Design of Complex Terrain Highway

基于无人机机载LiDAR与BIM技术在复杂地形公路设计中的应用

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 0

Recommended Articles

Metrics