[1] 仲建华,杜子学,何希和.跨座式单轨交通车辆道岔及结构分析[M].北京:人民交通出版社,2013.
ZHONG Jianhua, DU Zixue, HE Xihe. Structure and Analysis of Switch for Straddle Type Monorail Vehicle[M]. Beijing: China Communications Press, 2013.
[2] RODOVALHO E D C, TOMI G D. Reducing environmental impacts via improved tire wear management[J]. Journal of Cleaner Production, 2017, 141: 1419-1427.
[3] 郑州.跨座式单轨列车走行轮胎偏磨损机理及控制方法研究[D].镇江:江苏大学,2017.
ZHENG Zhou. Study on Shoulder Wear Mechanism and Control Method of Straddle-Type Monorail Trains Running Wheel Tires[D]. Zhenjiang: Jiangsu University, 2017.
[4] 杜子学,文孝霞,杨震,等.跨座式单轨车辆走行轮偏磨损因子模型研究[J].西南交通大学学报,2019,54(2):373-380.
DU Zixue, WEN Xiaoxia, YANG Zhen, et al. Study on partial-wear-factor model monorail vehicle running wheel[J]. Journal of Southwest Jiaotong University, 2019, 54(2): 373-380.
[5] 文孝霞,杜子学,许舟洲,等.单轨车辆耦合动力学模型与振动响应特性[J].振动.测试与诊断,2017,37(3):462-468.
WEN Xiaoxia, DU Zixue, XU Zhouzhou, et al. The coupling dynamic model and vibration response of straddle type monorail vehicle[J]. Jour-nal of Vibration, Measurement & Diagnosis, 2017, 37(3): 462-468.
[6] 文孝霞,杜子学,许舟洲,等.基于降低走行轮偏磨损的单轨车辆结构参数优化研究[J].现代制造工程,2016(12):9-15,93.
WEN Xiaoxia, DU Zixue, XU Zhouzhou, et al. Influence research of structural parameters on running wheel shoulder wear of the monorail vehicle[J]. Modern Manufacturing Engineering, 2016(12): 9-15, 93.
[7] 文孝霞,杜子学,左长永,等.曲线工况下跨座式单轨走行轮侧偏刚度对轮胎磨损的影响[J].交通运输工程学报,2014,14(2):41-48.
WEN Xiaoxia, DU Zixue, ZUO Changyong, et al. Influence of cornering stiffness of straddle-type monorail running wheel on tire wear under curve negotiating [J]. Journal of Traffic Transportation Engineering, 2014,14(2): 41-48.
[8] 张松.跨座式单轨列车走行轮轮胎工作模态与偏磨关系研究[D].镇江:江苏大学,2018.
ZHANG Song. Study on the Relationship between Operating Modal and Shoulder Wear of Straddle-Type Monorail Trains Running Wheel Tires[D]. Zhenjiang: Jiangsu University, 2018.
[9] 梁晖,王国林,梁晨,等.行驶面宽度和弧度高对轮胎偏磨损影响的有限元分析[J].橡胶工业,2019,66(3):207-212.
LIANG Hui, WANG Guolin, LIANG Chen, et al. Finite element analysis of effect of running surface width and arc height on tire uneven wear[J]. China Rubber Industry, 2019, 66(3): 207-212.
[10] 朱新静,朱作勇,赵鹏翔,等.轮胎带束层结构变化对固有频率的影响研究[J].轮胎工业,2017,37(5):259-263.
ZHU Xinjing, ZHU Zuoyong, ZHAO Pengxiang, et al. Influence of belt structure on tire natural frequency[J]. Tire Industry, 2017, 37(5): 259-263.
[11] 陈亮.双轴转向架单轨走行轮胎偏磨损分析及影响因素研究[D].重庆:重庆交通大学,2017.
CHEN Liang. Partial Wear Analysis and Influence Factors Study of Running Tire about Double Axle Bogie Monorail[D]. Chongqing: Chongqing Jiaotong University, 2017.
[12] WANG F. Vehicle running stability and evaluation index[J]. Vehicle System Dynamics, 2009: 15-31.
[13] GIM G H, NIKRAVESH P E. An analytical model of pneumatic tires for vehicle dynamic simulations. Part 1: Pure slips[J]. International Journal of Vehicle Design, 1990, 11(6): 589-618.
[14] GIM G H, NIKRAVESH P E. An analytical model of pneumatic tires for vehicle dynamic simulations. Part 2: Comprehensive slips[J]. International Journal of Vehicle Design, 1991, 12(1): 19-39.
[15] GIM G H, NIKRAVESH P E. An analytical model of pneumatic tires for vehicle dynamic simulations. Part 3: Validation against experimental data[J]. International Journal of Vehicle Design, 1991, 12(2): 217-228.
[16] ABAQUS Inc. Abaqus Scripting User's Manual[M]. Providence, Rhode Island: ABAQUS, 2016.
[17] 邓辉咏,王炎,郝刚,等.一种适用复杂非线性黑箱系统的参数灵敏度分析方法[J].火炮发射与控制学报,2016,37(1):12-16.
DENG Huiyong, WANG Yan, HAO Gang, et al. A parameter sensiti-vity analysis method suitable for complex non-linear black-box system[J]. Journal of Gun Launch & Control, 2016, 37(1): 12-16. |