Parametric Analysis on Mechanic Performance of Orthotropic Steel Bridge
Deck with Folded Plate
WU Lili1，AN Lipei1,2
(1. College of Mechanics and Civil Engineering, China University of Mining and Technology, Beijing 100083, China;
2. College of Civil Engineering, Hunan University, Changsha 410082, Hunan, China)
Abstract：Aiming at the fatigue problem of the joint of longitudinal rib and cover plate, and the convergence of cover plate, longitudinal rib and beam in orthotropic steel bridge deck with closed ribs, a type of orthotropic steel bridge deck with folded plate was taken as the research object, and the numerical simulation test was carried out by applying wheel load at the most unfavorable position of the steel bridge deck. The influences of five section parameters, such as the thickness of the top plate dt, the thickness of the bottom plate db, and the thickness df, the height hf and the space lf of the folded plate, on the mechanical properties of the orthotropic steel bridge deck with folded plate were analyzed. Based on the middle beam segment of an orthotropic steel deck of a highway bridge, the itegral steel deck model analysis was carried out. According to the numerical simulation, the recommended design values of five section parameters of the orthotropic steel bridge deck are dt=11 mm、db=7 mm、dz=4 mm、hf=200 mm、lf=200 mm. The integral steel deck model analysis further confirmed that the steel bridge deck with folded plate not only avoids the most common part of fatigue, but also significantly improves the transverse mechanical properties of the bridge deck to a certain extent, while it has no effect on the longitudinal direction of the bridge.
［1］ USD epartment of Transportation Federal Highway Administration. Man-ual for Design, Construction, and Maintenance of Orthotropic Steel Deck Bridges: FHWA-IF-12- 027 ［S/OL］.Washington, D C:US Department of Tranaportation Federal Highway Administration,2012 ［2019- 01- 12］.https:∥m.book118.com/html/2018/0308/156277350.shtm.
［2］ WOLCHUK R. Lessons from weld cracks in orthotropic decks on three European bridges ［J］. Journal of Structural Engineering，1990, 116(1): 75-84.
［3］ 李丽娟. 铺装层对正交异性钢桥面板疲劳性能影响的研究 ［D］.成都：西南交通大学，2014.
LI Lijuan. Research on the Influences of Pavement on the Fatigue Performance of Orthotropic Steel Bridge Deck ［D］. Chengdu: Southwest Jiaotong University, 2014.
［4］ 《中国公路学报》编辑部. 中国桥梁工程学术研究综述 ［J］. 中国公路学报，2014, 27(5): 1-96.
Editorial Department of China Journal of Highway and Transport. Review on Chinas bridge engineering research: 2014 ［J］. China Journal of Highway and Transport, 2014, 27(5): 1-96.
［5］ 童乐为，沈祖炎. 正交异性钢桥面板疲劳验算［J］. 土木工程学报，2000, 33(3): 16-21.
TONG Lewei, SHEN Zuyan.Fatigue assessment of orthotropic steel bridge decks ［J］. China Civil Engineering Journal, 2000, 33(3): 16-21.
［6］ 钱冬生. 关于正交异性钢桥面板的疲劳-对英国在加固其塞文桥渡时所做研究的评价 ［J］. 桥梁建设，1996(2): 10-15,9.
QIAN Dongsheng.Replying to questions on fabrication of stiffening steel flat box girders of suspension bridge ［J］. Bridge Construction, 1996(2):10-15,9.
［7］ 陶晓燕. 大跨度钢桥关键构造细节研究 ［D］. 北京：中国铁道科学研究院，2008.
TAO Xiaoyan.Research on Key Structure Details of Large-span Steel Bridge ［D］. Beijing:China Academy of Railway Sciences, 2008.
［8］ CHOI JH, KIM DH. Stress characteristics and fatigue crack behavior of the longitudinal rib-to-cross beam joints in an orthotropic steel deck ［J］. Advances in Structural Engineering，2008, 11(2): 189-198.
［9］ 颜飞，刘林. 正交异性钢桥面板不同闭口纵肋疲劳寿命分析 ［J］. 中国市政工程，2009(2): 22-23.
YAN Fei, LIU Lin. Fatigue life study of orthotropic steel deck with different types of closed vertical rib ［J］.China Municipal Engineering, 2009(2): 22-23.
［10］ 叶华文，徐勋，强士中，等. 开口肋正交异性钢桥面疲劳设计参数研究 ［J］. 西南交通大学学报，2012, 47(3): 379-386.
YE Huawen, XU Xun,QIANG Shizhong, et al. Fatigue design parameters for orthotropic steel decks of single plane cable-stayed bridges ［J］. Journal of Southwest Jiaotong University, 2012, 47(3): 379-386.
［11］ 叶华文，徐勋，强士中，等. 重庆两江大桥正交异性钢桥面板疲劳性能试验研究 ［J］. 中南大学学报（自然科学版），2013, 44(2): 749-756.
YE Huawen, XU Xun,QIANG Shizhong, et al. Fatigue test of orthotropic steel bridge deck in chongqingliangjiang bridge ［J］. Journal of Central South University (Science and Technology), 2013, 44(2): 749-756.
2020, Vol. 39 
