[1] QI Changguang, LIU Ganbin, WANG Yan, et al. A design method for plastic tube cast-in-place concrete pile considering cavity
contraction and its validation [J]. Computers & Geotechnics, 2015, 69(9): 262-271.
[2] CHEN Yohghui, QI Changguang, XU Hongyue, et al. Field test research on embankment supported by plastic tube cast-in-place
concrete piles[J].Geotechnical and Geological Engineering, 2013, 31(4): 1359-1368.
[3] 齐昌广, 刘干斌, 陈永辉, 等. 塑料套管管侧前注浆桩承载特性的现场试验研究[J].岩土力学,2015,36(8):2377-2385+2394.
QI Changguang, LIU Ganbin, CHEN Yonghui, et al. Field testing on the bearing characteristics of plastic tube cast-in-place concrete
pile with shaft pre-grouting [J]. Rock and Soil Mechanics, 2015, 36(8): 2377-2385+2394.
[4] 陈永辉, 齐昌广, 王新泉, 等. 塑料套管混凝土桩单桩承载特性研究[J]. 中国公路学报, 2012, 25(3): 51-59.
CHEN Yonghui, QI Changguang, WANG Xinquan, et al. Research on bearing performance of plastic tube cast-in-place single pile [J].
China Journal of Highway and Transport, 2012, 25(3): 51-59.
[5] 齐昌广, 陈永辉, 王新泉, 等. 塑料套管混凝土桩的承载力时间效应研究[J]. 岩土工程学报, 2015, 37(9): 1635-1643.
QI Changguang, CHEN Yonghui, WANG Xinquan, et al. Time effect of bearing capacity of plastic tube cast-in-place concrete piles [J].
Chinese Journal of Geotechnical Engineering, 2015, 37(9): 1635-1643.
[6] 王祖贵, 张松, 叶久洲, 等. 塑料管材环刚度计算图[J].化学建材, 2004, 18(6): 58-61.
WANG Zugui, ZHANG Song, YE Jiuzhou, et al. Calculation chart for loop stiffness of plastic pipes [J]. China Plastic, 2004, 18(6):
58-61.
[7] 魏中青, 闫宝瑞, 黄家文. 塑料双壁波纹管截面惯性矩的CAD分析及环刚度测试研究[J].塑料, 2007, 36(5): 92-96.
WEI Zhongqing, YAN Baorui, HUANG Jiawen. Inertia moment analysis on section of plastic twin-wall corrugated pipe and ring stiffness
testing research[J].Plastic, 2007, 36(5): 92-96. |