中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2010, Vol. 29 ›› Issue (6): 934-937.

Previous Articles     Next Articles

Experimental Study of Influence Factors of the Compaction Degree of Xigeda Roadbed Filling

WANG Wei-zao1,2,3,XU Qiang1   

  1. 1.State Key Laboratory of Geohazard Prevention and Geoenvironment Protection,Chengdu University of Technology, Chengdu 610059,Sichuan,China; 2.College of Economics,Shijiazhuang University,Shijiazhuang 050031,Hebei,China; 3.Key Laboratory of Water Resources Sustainable Utilization and Exploit,Shijiazhuang 050031,Hebei,China
  • Received:2010-06-17 Revised:2010-09-26 Online:2010-12-15 Published:2015-01-22

昔格达土路基填料压实度影响因素的试验研究

王维早1,2,3,许强1   

  1. 1.成都理工大学地质灾害防治与地质环境保护国家重点实验室,四川 成都 610059; 2.石家庄经济学院,河北 石家庄 050031; 3.河北省水资源可持续利用与开发重点实验室,河北 石家庄 050031
  • 作者简介:王维早(1976—),男,山东沂水人,讲师,博士生,主要从事道路工程研究方面的工作。E-mail:wangvz2005@126.com。
  • 基金资助:
    河北省科学技术研究与发展指导计划项目( 07276772)

Abstract: Xigeda soil as roadbed filling was studied in the paper. The influence of moisture content,gradation composition, effect of construction process on degree of compaction was studied. The results demonstrated that: degree of compaction was the best as the moisture content of Xigeda Filling was 12% ~ 17%; Cu and Cc of Xigeda Filling could meet the needs before and after compaction,therefore it was a good-grading filling; loose laying depth of Xigeda Filling was 30cm ~ 35cm under 16T road roller rolling and 35cm ~ 40cm under 18T road roller rolling; higher degree of compaction was achieved when firstly applying strong vibration and then weak vibration with road roller; it should be compacted six times with 16T road and five times with 18T road roller.

Key words: Xigeda Filling, moisture content, gradation composition, construction process, degree of compaction

摘要: 以昔格达土作为路基填料,进行了该填料的含水量、颗粒级配、施工工艺对压实度影响的相关性试验。试验 结果表明:昔格达土填料含水量在12%~17%之间时,路基的压实效果最佳;压实前后其Cu和Cc均满足要求,昔 格达土填料是一种级配好的填料;16t压路机碾压方式下适合昔格达土填料的松铺厚度为30~35cm,18t压路机 碾压方式下为35~40cm;2种压路机均以采用先强振后弱振的碾压方式压实度效果较好;16t压路机最佳的碾压 遍数为6遍、18t压路机为5遍时,效果最好。

关键词: 昔格达土填料, 含水量, 颗粒级配, 施工工艺, 压实度

CLC Number: