中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2011, Vol. 30 ›› Issue (3): 436-437.DOI: 10.3969/j.issn.1674-0696.2011.03.21

Previous Articles     Next Articles

Simulation Analysis of Vehicle-Road Coupling on Curved Ramp Road

ZHAO Shu-mei1,ZHENG Yi-nan2,CAO Yuan-wen3,WEI Dong3   

  1. 1.School of Traffic & Transportation,Chongqing Jiaotong University,Chongqing 400074,China; 2.School of Traffic,Southeast University,Nanjing 210096, Jiangsu China; 3.School of Mechatronics &Automotive Engineering,Chongqing Jiaotong University,Chongqing 400074,China
  • Received:2011-01-10 Revised:2011-03-07 Online:2011-06-15 Published:2015-03-12

弯坡路面的车路耦合仿真分析

赵书美1,郑易楠2,曹源文3,魏冬3   

  1. 1. 重庆交通大学交通运输学院,重庆400074; 2. 东南大学交通学院,江苏南京210096; 3. 重庆交通大学机电与汽车工程学院,重庆400074
  • 作者简介:赵书美(1986—),女,山东济南人,硕士研究生,主要从事车辆与交通安全方面的研究。E-mail:zhaoshumei-123123@126.com。
  • 基金资助:
    交通运输部西部交通建设科技项目(2008318814065)

Abstract: In the vehicle and road interaction study,it is not enough to consider the influence of road roughness only on dynamic load,but the driving condition should also be taken into account.According to the vehicle-road coupling characteristics, the models of heavy truck and 3D curved road were built with the ADAMS /Car dynamics simulation software.Meanwhile, the dynamic loads between the wheels and the pavement on curved ramp road and straight road were analyzed comparatively. The result indicated that the pavement damage of curved road was larger than that of straight road

Key words: road roughness, curved ramp road, dynamic load, coupling vibration

摘要: 车辆与道路相互作用的研究不仅只考虑路面不平整度对车辆动载荷的影响,而且应考虑行驶工况对车辆动 荷载的影响。针对车-路耦合作用的特点,运用ADAMS/Car动力学仿真软件,建立了重型卡车的多自由度仿真模 型和3D弯坡路面模型,通过分析弯坡路面和平直路面下车辆对路面的动载荷作用。表明,弯坡路面的疲劳破坏程 度比平直路面的大。

关键词: 路面不平度, 弯坡路面, 动荷载, 耦合振动

CLC Number: