中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2012, Vol. 31 ›› Issue (1): 124-127.DOI: 10.3969/j.issn.1674-0696.2012.01.31

Previous Articles     Next Articles

Optimization and Simulation Analysis of Vehicle Powertrain Mounting System

Li Nan1, Jian Xiaochun1, Zhang Chao2   

  1. 1. School of Traffic & Transportation, Chongqing Jiaotong University, Chongqing 400074, China;2. Chongqing Tiema Industries Corporation, Chongqing 400050, China
  • Received:2011-04-22 Revised:2011-10-14 Online:2012-02-15 Published:2015-04-15

动力总成悬置系统优化与仿真分析

李楠1,简晓春1,张超2   

  1. 1.重庆交通大学 交通运输学院,重庆 400074;2.重庆铁马工业集团有限公司,重庆 400050
  • 作者简介:李楠(1985-),女,安徽宿州人,硕士研究生,主要从事车辆与交通安全方面的研究。E-mail:200400612@163.com。

Abstract: Abstract:The energy decoupling has directly effects on the vibration isolation of the powertrain mounting system. Taking mounting position and stiffness as parameters, the energy decoupling was optimized. The impact of constrained range of mounting position on optimized system’s energy decoupling was analyzed. The result indicates that the decoupling of main vibration direction is improved. It also shows that a higher system’s energy decoupling can be obtained by increasing the constrained range of mounting position at a less price of vehicle’s compactness.

Key words: powertrain mounting system, optimization, simulation analysis

摘要: 能量解耦率直接影响到动力总成悬置系统的隔振性能。先以悬置位置参数和刚度参数为设计变量对系统的能量解耦率进行了优化设计,然后分析了悬置元件安装位置约束范围对系统优化解耦率的影响。结果表明:优化设计提高了系统能量解耦率,可以通过加大悬置位置约束范围来获得更高的解耦率,而系统的紧凑性损失不大。

关键词: 动力总成悬置系统, 优化, 分析

CLC Number: