中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2004, Vol. 23 ›› Issue (1): 6-9.

Previous Articles     Next Articles

Quality of vertical joints in continuous rigid bridges and its influence on the post-construction deflection of the bridges

HE Peng1, ZHOU Zhi-xiang1, JI Guo-fu, 2 LIANG Fa,1   

  1. 1.Department Of Bridge&Structure, Chongqing Jiaotong University, Chongqing 400074,China; 2.Highway Survey and Design Institute of Yunnan Province,Yunan 650000,China)
  • Received:2003-06-13 Revised:2003-10-25 Online:2004-02-15 Published:2015-05-18

连续刚构桥竖向接缝的质量及其对工后挠度的影响

贺朋1周志祥,1季国富,2范亮1   

  1. 1.重庆交通学院桥梁及结构工程系重庆400074;2.云南省公路勘测设计院昆明650000
  • 作者简介:贺朋(1979-),男,湖北荆州人,硕士生,主要从事预应力砼桥梁方面的研究

Abstract: In the paper one of the crucial causes of the excessive post-construction deflection generally occurring on large-span prestressed-concrete continuous rigid bridges, the quality of the segmental vertical joints, is analyzed. The shearing creep of the concrete filling the vertical joints under long-term loads is discussed to find that, in the case of the existent construction procedure, the increments of the deflection of the bridge main girders resulting from the shearing creep of the vertical

Key words: continuous rigid frame, segmental joints, shearing deformation, deflection

摘要: 笔者分析了大跨度预应力砼连续刚构普遍存在后期挠度过大的一个重要原因)))主梁节段间竖向接缝的质 量,讨论了在长期荷载作用下竖向接缝处砼的剪切徐变,认为在现有施工条件下由竖向接缝的剪切变形引起主梁 挠度的增量是不可忽视的,提出了改善主梁节段间接缝质量的一些注意事项及构造措施

关键词: 连续刚构, 节段接缝, 剪切变形, 挠度

CLC Number: