Based on External Rotor Switched Reluctance Motor’s Parameter Optimization Analysis

doi:10.3969/j.issn.1674-0696.2016.05.33

Journal of Chongqing Jiaotong University(Natural Science) ›› 2016, Vol. 35 ›› Issue (5): 174-179.DOI: 10.3969/j.issn.1674-0696.2016.05.33

• Vehicle & Electromechanical Engineering • Previous Articles Next Articles

Based on External Rotor Switched Reluctance Motor’s Parameter Optimization Analysis

JIANG Baojun¹，ZHOU Lin¹，ZHANG Dongsheng²，LUO Tengke¹

(1.School of Mechanical & Automotive Engineering,Chongqing Jiaotong University, Chongqing 400074,P.R.China；2. Institution of Research, Advanced Eleetronies Energy Limited, Fushan 528305, Guangdong, P.R.China)

Received:2015-07-27 Revised:2015-09-18 Online:2016-10-20 Published:2016-10-31
Contact: 周林（1990—），男，四川遂宁人，硕士研究生，主要从事新能源汽车方面的研究。E-mail:519464718l@qq.com。

基于外转子开关磁阻电机的参数优化分析

姜保军¹，周林¹,张栋省²，罗腾科¹

（1. 重庆交通大学机电与汽车工程学院，重庆 400074；2. 广东精进能源有限公司研究院，广东佛山 528305）

作者简介:第一作者：姜保军（1965—），男，黑龙江绥化人，副教授，博士，主要从事电机驱动与控制方面的研究。E-mail:jiang031@163.com。

Abstract

Abstract: A switched reluctance motor based on simulation platform of ANSOFT MAXWELL 2D was introduced for problem of torque ripple of switch reluctance hub motor with external rotor in high speed operation.By static and transient simulation analysis,a three-phase 12／8 switched reluctance motor was analyzed as the prototype machine to obtain motor’ all kinds of characteristic curves.When motor working in high speed, it could recede torque ripple by optimized turn-on angle, turn-off angle and magnetic pole structure of stator，with referring to these features.These optimization could provide a more smooth output torque of switched reluctance hub motor.

Key words: vehicle engineering, external rotor；switched reluctance motor；torque ripple；angular position control；optimization of magnetic pole structure

摘要： 针对高速运转时开关磁阻轮毂电机的转矩波动问题，基于ANSOFT MAXWELL 2D仿真平台，以3相12/8极外转子开关磁阻电机为例，进行静态和瞬态仿真分析，得到电机的各类特性曲线。参考这些特性曲线，可以在电机高速运行时，通过优化开通角、关断角和定子磁极结构来减少输出转矩波动——这些优化可使开关磁阻轮毂电机的输出转矩更为平顺。

关键词: 车辆工程, 外转子, 开关磁阻电机, 转矩波动, 角度位置控制, 磁极结构优化

CLC Number:

JIANG Baojun，ZHOU Lin，ZHANG Dongsheng，LUO Tengke. Based on External Rotor Switched Reluctance Motor’s Parameter Optimization Analysis[J]. Journal of Chongqing Jiaotong University(Natural Science), 2016, 35(5): 174-179.

姜保军，周林,张栋省，罗腾科. 基于外转子开关磁阻电机的参数优化分析[J]. 重庆交通大学学报（自然科学版）, 2016, 35(5): 174-179.

References

［1］闫大伟,陈世元.电动汽车驱动电机性能比较［J］.汽车电器,2004(2):4-6.
YAN Dawei, CHEN Shiyuan. Performance compare of driving motors on EV［J］. Auto Electric Parts,2004(2):4-6.
［2］吴建华.开关磁阻电机设计与应用［M］.北京:机械工业出版社,2000.
WU Jianhua. Design and Application of Switched Reluctance Motor［M］. Beijing: China Machine Press,2000.
［3］吴红星.开关磁阻电机系统理论与控制技术［M］.北京:中国电力出版社,2010:13,107.
WU Hongxing. Theory and Control Technology of Switched Reluctance Motor System［M］. Beijing: China Electric Power Press,2010:13,107.
［4］许祥勇,孟小利.基于Maxwell 2D的电励磁双凸极电动机仿真分析［J］.微电机,2007,40(7):24-27.
XU Xiangyong, MENG Xiaoli. Simulation and analysis of doubly salient electro-magnetic machine based on maxwell 2D［J］. Micromotors Servo Technique,2007,40(7):24-27.
［5］颜威利,杨庆新,汪友华,等.电气工程电磁场数值分析［M］.北京:机械工业出版社,2005.
YAN Weili, YANG Qingxin, WANG Youhua, et al. Numerical Analysis of Electrical Engineering Electromagnetic Field［M］. Beijing: China Machine Press,2005.
［6］刘国强,赵凌志,蒋继娅.Ansoft工程电磁场有限元分析［M］.北京:电子工业出版社,2006.
LIU Guoqiang, ZHAO Linzhi,JIANG Jiya. Finite Element Analysis of Project of Ansoft Electromagnetic Field［M］. Beijing: Publishing House of Electronics Industry,2006.
［7］赵博,张洪亮.Ansoft12在工程电磁场中的应用［M］.北京:中国水利水电出版社,2010.
ZHAO Bo, ZHANG Hongliang. Application of Ansoft12 in Engineering Field［M］. Beijing:China Water Power Press,2010.
［8］ CHEN G H,TSENG K J.Design of wheel motor using Maxwell 2D simulation［C］// Proceedings of the International Conference on Energy Management and Power Delivery. U S A: IEEE,1995,2:634-639.
［9］杨泽斌,孙玉坤,张新华.基于Ansoft的磁悬浮开关磁阻电动机电磁力仿真计算初探［J］.微特电机,2008(10):19-21.
YANG Zebin, SUN Yukun, ZHANG Xinhua. A study on simulating calculation of electromagnetic force for bearingless switched relucatance motor based on Ansoft［J］. Small and Special Electrical Machines,2008(10):19-21.
［10］LI Weili, SHENG Man, HUO Fei. Optimal design and finite element analysis of switched reluctance motor for electric vehicles［C］// 2008 IEEE Vehicle Power and Propulsion Conference. Harbin: VPPC,2008.
［11］汤蕴璆.电机学［M］.北京:机械工业出版社,2011.
TANG Yunqiu. Electromechanics［M］. Beijing: China Machine Press,2011.

[1]	XIN Liang1,2, DU Zixue1, YANG Zhen2, XU Zhouzhou2. Active Control of the Straddle-Type Monorail Vehicle with Single-Axle Bogie [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 123-127.
[2]	ZHANG Dongdong, ZONG Zichun, FENG Jinzhi. Multi-objective Optimization of Shift Law for Two-Gear AMT Based on NSGA-Ⅱ Algorithm [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 128-135.
[3]	LI Shengyong1, ZHANG Zhihua1, WANG Shengnan2, WANG Meng2. Defect Recognition Algorithm for Vehicle Metal Materials [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 136-144.
[4]	DU Zixue, WU Haoxin. Influence of Suspension Parameters on Air Gap Stability and Running Stability of Linear Motor Straddle Monorail Vehicle [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(06): 124-129.
[5]	DENG Mingyang1,2，GUO Yingshi1. Interpolation Coupling Wireless Charging Technology for Electric Vehicles [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(06): 130-135.
[6]	DU Zixue, MA Chuanxiang. Operation Stability Analysis of Articulated Straddle Monorail Train [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 122-128.
[7]	YU Man, ZHAO Weihua, WU Ling, LI Yuhan. Working Condition of Electric Vehicle Based on K-Mean Clustering and Support Vector Machine [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 129-139.
[8]	CAO Yuanwen1, CHEN Zuo1, ZHAO Jiang2, ZHANG Xiaoqiang3, ZHENG Tingting4. Driving Stability of Wheel Loader under Multiple Road Conditions [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 140-146.
[9]	DU Zixue, WU Haoxin, YANG Zhen. Curve Negotiation Performance of Linear Motor Straddle Monorail Vehicle [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 127-132.
[10]	DENG Tao1, LI Xin2. Combined Control Method of Intelligent Vehicle Longitudinal and Lateral Motion [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 133-140.
[11]	LI Yaohua, LIU Yang, SONG Weiping, SHAO Pandeng, REN Tianyuan. Components Durability Test Conditions Based on Driving Condition [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 141-146.
[12]	LIU Zhen1,3, LIN Xin1,2, WU Huawei1,3, YE Congjin1,3, GENG Xiangyang4. Design of IGBT Heat Dissipating Fin Structure Based on STAR-CCM+ [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(03): 128-134.
[13]	LI Jun, ZHANG Jun, ZHANG Shiyi. Lithium Battery SOC Estimation Based on ABP-EKF Algorithm [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(03): 135-140.
[14]	HAO Gang1, 2, JIN Tao1. Performance Degradation Assessment of Rolling Bearings Based on Hidden Markov Model [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 123-128.
[15]	LIU Chaotao, DI Kehong, DU Zixue, YANG Zhen. Active Control of Straddle Monorails Pantograph-Catenary Coupling [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 129-135.

Based on External Rotor Switched Reluctance Motor’s Parameter Optimization Analysis

基于外转子开关磁阻电机的参数优化分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics