Analysis on ST OFFSHORE Anchor 3D Modeling ＆ FEA

Journal of Chongqing Jiaotong University(Natural Science) ›› 2010, Vol. 29 ›› Issue (2): 303-306.

Previous Articles Next Articles

Analysis on ST OFFSHORE Anchor 3D Modeling ＆ FEA

LEI Lin¹，WANG Zhi-xiang¹，ZHANG Min¹，ZHANG Guo-peng²

1.Chongqing Engineering Research Center for Special Ship Digital Design ＆ Manufacturing， Chongqing Jiaotong University，Chongqing 400074，China; 2.Chongqing Marine ＆ Industries Co.Ltd.，Chongqing 400021，China

Received:2009-09-11 Revised:2010-01-23 Online:2010-04-15 Published:2015-01-22

ST OFFSHORE 锚三维建模及有限元分析

雷林¹，王智祥¹，张敏¹，张国鹏²

1.重庆交通大学重庆市特种船舶数字化设计与制造工程技术研究中心，重庆 400074; 2.重庆鹏祥船舶工业有限公司，重庆 400021

作者简介:雷林(1963—)，男，重庆万州人，副教授，主要从事船舶水动力性能、船体结构与强度研究方面的工作。E-mail:ll40182@163.com。
基金资助:
重庆市科技攻关计划项目(CSTC 2008AC3106);重庆市创新能力建设项目(CSTC，2009CB3002)

Abstract

Abstract: The ST/STS OFFSHORE ANCHOR series is a new type steel plate welding anchor with large holding，according to the requirements of CCS，the finite element analysis of structural strength for the anchor must be done. 3D modeling and FEA software(ABAQUS) are used in this paper to analyze the structural strength of the 15000Kg ST OFFSHORE ANCHOR. The results show that the structural strength satisfies the large holding load requirement of the Classification Society.

Key words: vessel, anchor, 3D modeling, FEA, Abaqus

摘要： ST/STSOFFSHORE锚是一种新型大抓力钢板焊接锚，按船级社的要求，必须对该锚进行有限元结构强度分析。以15000kGSTOFFSHORE锚为例，对STOFFSHORE锚应用三维软件建模并用有限元方法进行了结构强度分析。分析结果表明，该锚结构强度满足船级社的大抓力负荷要求。

关键词: 船舶, 锚, 三维建模, 有限元分析, Abaqus

CLC Number:

U663

LEI Lin，WANG Zhi-xiang，ZHANG Min，ZHANG Guo-peng. Analysis on ST OFFSHORE Anchor 3D Modeling ＆ FEA[J]. Journal of Chongqing Jiaotong University(Natural Science), 2010, 29(2): 303-306.

雷林，王智祥，张敏，张国鹏. ST OFFSHORE 锚三维建模及有限元分析[J]. 重庆交通大学学报（自然科学版）, 2010, 29(2): 303-306.

[1]	LIU Jie. Short-Term Passenger Flow Prediction between High-Speed Railway Stations Based on Stacked Auto-encoder [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 26-30.
[2]	YE Xianfeng, HAN Yijiang, ZHU Chijie, CHENG Yong. Risk Assessment of Anchorage Slope Instability Based on Improved Variable Weight-TOPISIS [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 108-115.
[3]	ZHAO Lidu1, CHEN Bo2, LIU Guoqiang2, WU Yifei2, ZHOU Yin1, YANG Yupeng3, GUO Tong4, HAN Daguang1. Automatic Extraction and Analysis of Expressway Subsidence Based on Ground 3D Laser Scanning [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(08): 14-19.
[4]	QIU Hongsheng1，ZHU Wanxin1，LI Junhui2，FU Zhanglong1. Settlement Characteristics of Anchor Static Pressure Piles in Prefabricated Bridge Piers [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(08): 59-65.
[5]	WANG Haicheng1，XIAO Jun2，GUO Xiang3，WANG Feng1，CHEN-JIANG Haonan4. A New Method for Alignment Control of Datum Strand of Self-anchored Suspension Bridge [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(07): 60-65.
[6]	WANG Shaohua1,2, HUANG Jianling1,3, CHEN Yanyan1, LIU Zhuo1, CHEN Ning1. Traffic Manner Judgment for Bicyclist [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(06): 19-24.
[7]	LIU Jiakui1, LUO Hao1, DU Bin2. Adjusting Method for Anchor-Span Cable Force of Steel Truss Suspension Bridge in the Cabling Phase [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(02): 50-54.
[8]	LI Yang1, JIA Lijun2. Simulation Analysis on Adhesive Anchorage of CFRP Cables Based on Tsai-Wu Criterion [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(01): 60-66.
[9]	YAN Lei, CAO Lei, YANG Kai. Seismic Fragility Analysis of Self-anchored Suspension Bridge Based on Incremental Dynamic Analysis [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(11): 41-45.
[10]	LAN Zhangli, LI Zhan, LI Wei. Lane Image Sequence Stitching Based on SURF and Optimal Seam [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(10): 13-18.
[11]	XING Xiaofei1, SHI Yalong1, SHEN Wenhui2, LU Yingming3. Analysis and Solution to Uneven Force of Prestressed Anchor Cable [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(09): 29-33.
[12]	YANG Jingdong, HE Ruifeng, LIU Wenbin. Strengthening and Strength Calculation of Supporting Structure for the Marine Patrol Ship Haixun-163 Anchor Chain Winch [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(08): 111-116.
[13]	ZHANG Yu1, CAO Youqiang2. Modal Optimization of BIW Based on Concept Feature Model [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(07): 114-118.
[14]	JIANG Xiaobin1, TAN Jiawan2, REN Hongxiang1, QIU Shaoyang1. Interactive Simulation System of Marine Windlass Based on Virtual Reality Technology [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(06): 12-16.
[15]	GUO Jun, LIU Shenghong, GAO Song, CAI Linzhen. Estimation Formula of Vertical Bending Vibration Fundamental Frequency of Self-anchored Single Tower Suspension Bridge [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(05): 27-32.

Analysis on ST OFFSHORE Anchor 3D Modeling ＆ FEA

ST OFFSHORE 锚三维建模及有限元分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics