No-margin Assembly Technology of 5,500 DWT Oil Tanker

Journal of Chongqing Jiaotong University(Natural Science) ›› 2010, Vol. 29 ›› Issue (4): 663-666.

No-margin Assembly Technology of 5,500 DWT Oil Tanker

LEI Lin¹, WANG Zhi-xiang¹, ZHANG Min¹, LI Ming-yi²

1.Chongqing Engineering Research Center for Special Ship Digital Design and Manufacturing, Chongqing Jiaotong University, Chongqing 400074, China; 2.Chongqing Dongfeng Shipbuilding Corporation, Chongqing 400026, China

Received:2009-09-11 Revised:2010-05-10 Online:2010-08-15 Published:2015-01-22

5500t成品油船平行中体无余量船台装配工艺

雷林¹, 王智祥¹, 张敏¹, 李名毅²

1.重庆交通大学重庆市特种船舶数字化设计与制造工程技术研究中心, 重庆 400074; 2.重庆长航东风船舶工业公司, 重庆 400026

作者简介:雷林(1963—),男,重庆万州人,副教授,主要从事船舶制造工艺、船体结构与强度研究方面的工作。E-mail:ll40182@163.com。
基金资助:
重庆市科技攻关计划项目(CSTC 2008AC3106 ) ; 重庆市工程技术研究中心建设项目(CSTC, 2009CB3002)

Abstract

Abstract: No-margin assembly technology plays an important process in shortening the building cycle, decreasing labor intensity and production cost and improving ship building quality and production effeciency. No-margin assembly can usually be achieved through section no-margin or section pre-dressing method. In order to build the 5, 500 DWT oil tanker with no-magin building berth assembly technology, the reality of building industry was studied, relevant technologies at home and abroad were analyzed, and finally no-margin parallel middle body building berth assembly technology scheme based on subassembly pre-dressing method was established

Key words: no-margin, building berth assembly, technology

摘要： 无余量船台装配工艺是缩短船舶建造周期、降低劳动强度和生产成本、提高船舶建造质量和生产效率的重要工艺过程,通常可通过分段无余量制造方法或分段预修整方法实现船台无余量装配。为满足采用无余量船台装配工艺建造5500t成品油船的要求,结合船舶建造单位场地、设备、人员的实际情况,对国内外相关技术进行分析研究;介绍了基于分段预修整方法的5500t成品油船平行中体无余量船台装配工艺。

关键词: 无余量, 船台装配, 工艺

CLC Number:

U663

LEI Lin, WANG Zhi-xiang, ZHANG Min, LI Ming-yi. No-margin Assembly Technology of 5,500 DWT Oil Tanker[J]. Journal of Chongqing Jiaotong University(Natural Science), 2010, 29(4): 663-666.

雷林, 王智祥, 张敏, 李名毅. 5500t成品油船平行中体无余量船台装配工艺[J]. 重庆交通大学学报（自然科学版）, 2010, 29(4): 663-666.

[1]	YU Hao1, YANG Jie2, HE Zhaoyi2, QIN Min3, YANG Zhiqiang2. Coarse Aggregate Angularity and Its Influence on the Performance of Asphalt Mixture [J]. Journal of Chongqing Jiaotong University(Natural Science), 2025, 44(6): 26-34.
[2]	YANG Yanhai，SHI Mingyang，YANG Ye，JIN Xin. Energy Saving and Emission Reduction Effect of Warm Mix Regeneration Fusion Technology Based on LCA [J]. Journal of Chongqing Jiaotong University(Natural Science), 2025, 44(4): 52-57.
[3]	CHEN Lili1， JIANG Xiaohong1， ZHANG Jie2， DING Yiwen1. DSACNet: Improved YOLOX Road Defect Detection under Foggy Conditions [J]. Journal of Chongqing Jiaotong University(Natural Science), 2025, 44(2): 53-60.
[4]	ZHANG Yongan1, ZHENG Li2, YANG Le2, 3, WEN Tao1, 2. Hydrogeological Numerical Simulation and Application of Project of Zhongliangshan Double Tunnels [J]. Journal of Chongqing Jiaotong University(Natural Science), 2025, 44(12): 89-95.
[5]	CHEN Yuguang1, 2, HU Shan1, LIN Honghao1, HUANG Jintao2, GUO Fengxiang1. Automated Traffic Conflict Detection Method at Urban Intersections Based on Improved YOLOv8-DeepSORT [J]. Journal of Chongqing Jiaotong University(Natural Science), 2025, 44(10): 35-42.
[6]	ZHANG Hang1, PENG Xiang1, MA Baolin1, WANG Xingyue1, LYU Nengchao2. Same-Side Continuous Entrance Spacing on Expressway Mainline Based on Cellular Automata [J]. Journal of Chongqing Jiaotong University(Natural Science), 2024, 43(7): 61-69.
[7]	LUO Wei1,2, LU Xi1,2, XU Changjie1,2, CHEN Jingyu1,2, TAO Zhi1,2. Nonlinear Energy Consumption Analysis of Cracked Slopes Stability Considering Hydraulic Effect [J]. Journal of Chongqing Jiaotong University(Natural Science), 2024, 43(3): 26-34.
[8]	ZHU Aizhu1, WANG Jiameng1, PAN Wenming2，CUI Bing3, ZHU Hongping1. Virtual Preassembly Technology of Steel Box Segment Based on PCL [J]. Journal of Chongqing Jiaotong University(Natural Science), 2024, 43(1): 10-17.
[9]	BAO Xueying1, ZHAO Jinxia1, BAN Xinlin2,3, XU Jianchao2,3. Risk Factors of Railway Bridge and Tunnel Engineering Technology Interface [J]. Journal of Chongqing Jiaotong University(Natural Science), 2023, 42(9): 18-26.
[10]	ZHANG Zhanmei1, 2, HUANG Ziran1, ZHANG Zhongtian1, SHI Ruiqi1, REN Xiaoyu1. Application Practice of MBR Technology in Rural Domestic Sewage Treatment [J]. Journal of Chongqing Jiaotong University(Natural Science), 2023, 42(6): 72-75.
[11]	TANG Wei, LI Ning, ZOU Xiaoyong, ZHAN He, YU Xin. Homogeneity of Plant-Produced RAP Mixtures Based on DIP Technology [J]. Journal of Chongqing Jiaotong University(Natural Science), 2023, 42(1): 60-65.
[12]	ZHAO Xiaohua1, DONG Wenhui1, JU Yunjie1, ZHANG Changfen2, YIN Jizhou3. Comprehensive Utility Evaluation and Influence Mechanism of Traffic Safety Facilities in Tunnel Based on Driving Simulation [J]. Journal of Chongqing Jiaotong University(Natural Science), 2022, 41(10): 7-15.
[13]	GUO Xiaohong1, WANG Jinqiao2, HUANG Weirong3, ZHOU Minxu2, SHAO Fazhan4. Study on Mixing Parameters Based on Domestic Foamed Asphalt Cold Regeneration Equipment [J]. Journal of Chongqing Jiaotong University(Natural Science), 2022, 41(10): 123-129.
[14]	JIANG Haopeng, JIANG Annan. Bridge Model Design and Information Processing Based on BIM Technology [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(12): 82-89.
[15]	PANG Song. Scientifical Promotion of the Development and Application of Automatic Driving Technology — Embrace New Technologies and Meet New Challenges [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(10): 119-122.