[1]黄大星,何仁,李丽群.微混合动力城市客车动力系统的参数匹配[J].重庆交通大学学报(自然科学版),2009,28(6):1118-1120. HUANG Daxing,HE Ren,LI Liqun.Parameters matching of power system of micro hybrid electric city bus [J].Journal of Chongqing Jiaotong University(Natural Science),2009,28(6):1118-1120. [2]吴先友,刘仁.一种微型车用半轴全浮支承式动力储备驱动后桥[J].重庆交通大学学报(自然科学版),2011,30(4):864-867. WU Xianyou,LIU Ren.Half shaft & full floating power reserved drive axle for micao-automobile [J]. Journal of Chongqing Jiaotong University(Natural Science),2011,30(4):864-867. [3]许在文,万海桥,黄东东,等.汽车传动系扭转振动建模与仿真分析[J].合肥工业大学学报(自然科学版),2012,35(1):13-16. XU Zaiwen,WAN Haiqiao,HUANG Dongdong,et al.Modeling and simulation analysis of vehicle transmission torsional vibration[J].Journal of Hefei University of Technology(Natural Science),2012,35(1):13-16. [4]胡乃杰,黄波.微车用传动轴中间支撑的刚度分析和改进[J].机床与液压,2011,39(18):18-19. HU Naijie,HUANG Bo.Analysis and improvement of stiffness of microcar drive shaft center support[J]. Machine Tool and Hydraulics,2011,39(18):18-19. [5]郭彦颖,孙中辉,孙中红,等.传动轴长度和角度的校核计算[J].汽车技术,2008,5:34-37. GUO Yanhui,SUN Zhonghui,SUN Zhonghong,et al.The check on length and angle of propeller shaft[J].Automobile Technology,2008,5:34-37. [6]孟庆华,周晓军,庞茂.车辆驱动桥噪声分析及试验研究[J].振动与冲击,2006,25(1):136-139. MENG Qinghua,ZHOU Xiaojun,PANG Mao.Analysis and investigation on vehicle driver axle’s noise[J].Jouranl of Viration and Shock,2006,25(1):136-139. [7]陈亮.驱动桥壳体结构声振分析与改进[D].成都:西南交通大学,2013 . CHEN Liang.Analysis and Improvement of Vibration and Noise of a Driving Axle Housing[D].Chengdu:Southwest Jiaotong University,2013. [8]杨志刚,田浪,单少华.基于ADAMS与MATLAB自平衡双轮车混合模型建模[J].重庆交通大学学报(自然科学版),2013,32(1):112-116. YANG Zhigang,TIAN Lang,SHAN Shaohua.Multi-body dynamic model building of self-balancing dual-wheeled vehicle using ADAMS and MATLAB[J].Journal of Chongqing |