[1] 刘忠明,段守敏,王长路. 风力发电齿轮箱设计制造技术的发展与展望[J].机械传动,2006,30(6):1-6.
LIU Zhongming, DUAN Shoumin, WANG Changlu. Development and prospect of design and manufacture technology of gearboxes for wind turbines[J]. Journal of Mechanical Transmission, 2006,30 (6): 1-6
[2] 张志宏,刘忠明,张和平,等. 大型风电齿轮箱行星架结构分析及优化[J].机械设计,2008,25(9):54-56.
ZHANG Zhihong, LIU Zhongming, ZHANG Heping, et al. Structural analysis and optimization on the planet frame of large scaled gearbox of wind turbine[J]. Journal of Machine Design, 2008, 25 (9): 54-56.
[3] 丁显,刘瑞华,滕伟. 风电机组齿轮箱行星架疲劳寿命分析[J]. 可再生能源,2013,31(3):46-50.
DING Xian, LIU Ruihua, TENG Wei. Analysis of fatigue life of wind turbine gearbox planet carrier [J]. Renewable Energy Resources, 2013, 31 (3): 46-50.
[4] 张立勇. 大型风电齿轮箱均载性能研究及优化[D]. 北京:机械科学研究总院,2009.
ZHANG Liyong. The Study on Load Sharing Properties and Optimization of Large Scale Wind Turbine Gearbox[D]. Beijing: China Academy of Machinery Science and Technology, 2009.
[5] 东立剑. 大型风电齿轮箱行星架模态分析与多目标优化[D]. 武汉:华中科技大学,2013.
DONG Lijian. Model Analysis and Multi-objective Optimization of the Planet Carrier in Wind Turbine Gearbox[D]. Wuhan: Huazhong University of Science and Technology, 2013.
[6] 侯秋凉. 偏航齿轮箱行星架的性能分析及结构优化设计[D]. 大连:大连理工大学,2013.
HOU Qiuliang. Performance Analyze and Structural Optimization Design of the Planet Carrier in Yaw Gearbox[D]. Dalian: Dalian University of Technology, 2013.
[7] 涂杰,罗强. 大型风电齿轮箱行星架-销轴系统有限元分析[J]. 机床与液压,2018,46(21):169-172.
TU Jie, LUO Qiang. Finite element analysis on planetary carrier and shaft system of large-sized wind turbine gearbox[J]. Machine Tool and Hydraulics, 2018,46 (21): 169 -172.
[8] 孙黎,石鹏飞,代海涛,等. 风电齿轮箱低速级行星架极限强度分析[J]. 机械制造,2017,55(636):43-46.
SUN Li, SHI Pengfei, DAI Haitao, et al. Ultimate strength analysis of low speed planetary carrier of wind turbine gearbox[J]. Machinery, 2017,55 (636): 43-46.
[9] 呼斯乐图,段富海,来进勇,等. EMA行星架多目标优化与疲劳可靠性分析[J]. 机电工程技术,2018,47(1):41-47.
HU Si Letu, DUAN Fuhai, LAI Jinyong, et al. Multi-objective optimization and fatigue reliability analysis of EMA planetary carrier [J]. Mechanical & Electrical Engineering Technology, 2018,47 (1): 41-47.
[10] 杨龙. 大功率行星减速器行星架特性分析及结构优化[D]. 哈尔滨:哈尔滨船舶锅炉涡轮机研究所,2011.
YANG Long.Characteristic Analysis and Structure Optimization of Carrier for High-Power Planetary Gearbox[D]. Harbin: Harbin Ship Boiler Turbine Research Institute, 2011.
[11] SANKAR S, NATARAJ M, PRABHU RAJA V.Failure analysis of bearing in wind turbine generator gearbox[J]. Journal of Information Systems and Communication, 2012, 3(1):302-309.
[12] YI Pengxing, DONG Lijian, SHI Tielin. Multi-objective genetic al-gorithms ased structural optimization and experimental investigation of the planet carrier in wind turbine gearbox[J]. Frontiers of Mechanical Engineering, 2014, 9(4):354-367.
[13] BLUNT D M, KELLER J A. Detection of a fatigue crack in a UH-60A planet gear carrier using vibration analysis[J]. Mechanical Systems and Signal Processing, 2006, 20(8) :2095-2111.
[14] HAO Dongsheng, WANG Delun. Finite-element modeling of the failure of interference-fit planet carrier and shaft assembly[J]. Engineering Failure Analysis, 2013, 33:184-196.
[15] YI Pengxing, HUANG Peng, SHI Tielin. Numerical analysis and experimental investigation of modal properties for the gearbox in wind turbine[J]. Frontiers of Mechanical Engineering, 2016, 11(4):388-402.
[16] 江民圣.ANSYS Workbench 19.0 基础入门与工程实践[M]. 北京:人民邮电出版社,2019.
JIANG Minsheng. Introduction and Engineering Practice of ANSYS Workbench 19.0 Foundation [M]. Beijing: Posts and Telecom Press, 2019. |