中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2012, Vol. 31 ›› Issue (5): 930-934.DOI: 10.3969/j.issn.1674-0696.2012.05.04

Previous Articles     Next Articles

Experimental Study on the Structural Performance of GFRP-Concrete Composite Arch

Yang Qingguo,Tian Ju,Tu Zhizhong,Li Ya   

  1. School of Civil Engineering and Architecture,Chongqing Jiaotong University,Chongqing 400074,China
  • Received:2011-12-31 Revised:2012-03-02 Online:2012-10-15 Published:2015-01-22

玻璃钢(GFRP)- 混凝土复合拱试验研究

杨庆国,田菊,涂志忠,李亚   

  1. 重庆交通大学土木建筑学院,重庆400074
  • 作者简介:杨庆国(1969—),男,河南洛阳人,教授,硕士生导师,主要从事道路和桥梁力学方面的研究。E-mail:yangqg7053@126.com。

Abstract: By bonding GFRP in different locations of concrete arch,6 GFRP-concrete composite arches were gained. Through destructive test of the arches,the failure modes,load-deflection curves,structural stiffness and bearing capacities of GFRP-concrete composite arches were studied.The experiments showed that GFRP-concrete composite arch has a higher cracking load.Before cracking the stiffness of GFRP-concrete composite arch is higher than ordinary concrete arch.After cracking,the stiffness and crack resistance of GFRP-concrete composite arch are significantly higher than ordinary concrete arch.Also the bearing capacities and ultimate deformation of GFRP-concrete composite arch are higher.The composite arch boned with circular and U-shaped GFRP has superior mechanical performance to those which with single-side shaped GFRP. However,the performance of composite arch with total arch-shaped GFRP is not optimal.

Key words: GFRP-concrete composite arch, failure mode, deflection, cracking load, ultimate load

摘要: 在混凝土拱的不同位置、采用不同黏贴形式黏贴玻璃钢( GFRP) 得到了6 个GFRP-混凝土复合拱。对GFRP- 混凝土复合拱进行了加载破坏试验,并对其破坏形式、荷载挠度曲线规律、刚度规律和承载力等结构性能进行了研 究。试验表明:GFRP-混凝土复合拱开裂荷载更高,开裂前的刚度明显高于普通混凝土拱,开裂后其刚度及抗裂性 能也明显优于普通混凝土拱; GFRP-混凝土复合拱具有更高的极限承载力和极限变形。GFRP-混凝土复合拱中,黏 贴GFRP 的范围较大时,GFRP-混凝土复合拱的力学性能更优; 采用环形及U 形黏贴GFRP 的复合拱力学性能明显 优于采用单面黏贴GFRP 的复合拱,但全拱环形黏贴GFRP 的复合拱性能并非最优。

关键词: GFRP-混凝土复合拱, 破坏形式, 挠度, 开裂荷载, 极限荷载

CLC Number: