中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2012, Vol. 31 ›› Issue (6): 1113-1115.DOI: 10.3969/j.issn.1674-0696.2012.06.04

Previous Articles     Next Articles

Affect of Segmented Cast-in-Place Length on Mechanical Behavior of Continuous Beam Bridge Constructed by Rotary Method

Han Jun1,Xu Sufang1,Wu HaiJun2   

  1. 1. Chongqing Tongli Expressway Project Co. ,Ltd. ,Chongqing 401147,China;2. School of Civil Engineering & Architecture,Chongqing Jiaotong University,Chongqing 400074,China
  • Received:2011-12-14 Revised:2012-09-14 Online:2012-12-15 Published:2014-10-31

现浇分段长度对平转连续梁桥受力的影响

韩均1,徐素芳1,吴海军2   

  1. 1.重庆通力高速公路工程有限公司,重庆 401147; 2. 重庆交通大学 土木建筑学院,重庆 400074
  • 作者简介:韩均(1961—),男,四川成都人,教授级高级工程师,主要从事道路桥梁建设维护工作。E-mail:hanjunal@Tom.com。
  • 基金资助:
    交通运输部西部交通建设科技基金项目( 2006-318-223-02-06)

Abstract: Upper and lower edge stress,horizontal and vertical displacement of different section length of the actual continuous beam bridge project rotation section are calculated and analyzed with finite element model. It was found that different section length has little effect on the stress of the rotation section,but has significant impact on displacement

Key words: continuous beam bridge, rotary method, construction of cast-in-place, section length, stress, displacement

摘要: 针对工程实例建立有限元分析模型,研究了不同分段长度对平转连续梁转体段受力的影响,分析了不同分段长度时转体段各截面上、下缘应力以及各节点累计水平和竖向位移。结果表明: 不同分段长度方案对转体段的应力影响较小,但对位移有着显著影响。

关键词: 连续梁桥, 平转法, 现浇施工, 分段长度, 应力, 位移

CLC Number: