Control Method for Electric Power Steering System
Based on Dead-Zone Inverse Transforming Compensation

doi:10.3969/j.issn.1674-0696.2014.03.31

Journal of Chongqing Jiaotong University(Natural Science) ›› 2014, Vol. 33 ›› Issue (3): 145-148.DOI: 10.3969/j.issn.1674-0696.2014.03.31

Previous Articles Next Articles

Control Method for Electric Power Steering System Based on Dead-Zone Inverse Transforming Compensation

Liang Songfeng ¹,Dong Zhurong^1,2, Qiu Hao¹

1.School of Automotive & Transportation Engineering , Shenzhen Polytechnic , Shenzhen 518055 , Guangdong, China; 2.School of Mechanical , Electronic & Control Engineering, Beijing Jiaotong University , Beijing 100044 , China

Received:2012-08-15 Revised:2014-02-25 Online:2014-06-15 Published:2015-01-22

基于死区逆变换补偿的纯电动转向系统控制方法设计

梁松峰¹，董铸荣^1,2，邱浩¹

1.深圳职业技术学院汽车与交通学院.广东深圳 518055;2.北京交通大学机电控制工程学院，北京 100044

作者简介:梁松峰(1981—)，男，广东梅州人，讲师，硕士，主要从事电动汽车转向与驱动系统方面的研究。E-mail:4226258@qq.com
基金资助:
广东省自然科学基金项目( 520 110 10002534 )

Abstract

Abstract: Through the ana!ysis of experimenta! data , the actuator mathematical model was deduced. According to the characteristics that the actuator had the dead-zone , the control algorithm regarding the dead-zone inverse transforming compensation was designed to eliminate the adverse impact of dead-zone for control system. The effectiveness of improved algorithm was validated theoretically by MATLAB , and the corresponding control parameters were obtained. Real vehicle experiment results show that the proposed method can effective!y eliminate the control deviations caused by dead-zone.

Key words: vehicle engineering, electric power steering, dead-zone inverse transforming compensation

摘要： 通过对执行机构实验数据的分析推导出其数学模型;针对机构存在死区的特点设计了逆变换补偿的控制算法，消除了死区对控制系统的不良影响。使用MATLAB从理论上检验了改进算法控制的有效性，获得了相应控制参数。实车验证结果表明:该方法可以有效的消除由死区导致的控制误差。

关键词: 车辆工程, 纯电动转向, 死区逆变换补偿

CLC Number:

U463.4

Liang Songfeng ,Dong Zhurong , Qiu Hao. Control Method for Electric Power Steering System Based on Dead-Zone Inverse Transforming Compensation[J]. Journal of Chongqing Jiaotong University(Natural Science), 2014, 33(3): 145-148.

梁松峰，董铸荣，邱浩. 基于死区逆变换补偿的纯电动转向系统控制方法设计[J]. 重庆交通大学学报（自然科学版）, 2014, 33(3): 145-148.

[1]	XIN Liang1,2, DU Zixue1, YANG Zhen2, XU Zhouzhou2. Active Control of the Straddle-Type Monorail Vehicle with Single-Axle Bogie [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 123-127.
[2]	ZHANG Dongdong, ZONG Zichun, FENG Jinzhi. Multi-objective Optimization of Shift Law for Two-Gear AMT Based on NSGA-Ⅱ Algorithm [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 128-135.
[3]	LI Shengyong1, ZHANG Zhihua1, WANG Shengnan2, WANG Meng2. Defect Recognition Algorithm for Vehicle Metal Materials [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 136-144.
[4]	DU Zixue, WU Haoxin. Influence of Suspension Parameters on Air Gap Stability and Running Stability of Linear Motor Straddle Monorail Vehicle [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(06): 124-129.
[5]	DENG Mingyang1,2，GUO Yingshi1. Interpolation Coupling Wireless Charging Technology for Electric Vehicles [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(06): 130-135.
[6]	DU Zixue, MA Chuanxiang. Operation Stability Analysis of Articulated Straddle Monorail Train [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 122-128.
[7]	YU Man, ZHAO Weihua, WU Ling, LI Yuhan. Working Condition of Electric Vehicle Based on K-Mean Clustering and Support Vector Machine [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 129-139.
[8]	CAO Yuanwen1, CHEN Zuo1, ZHAO Jiang2, ZHANG Xiaoqiang3, ZHENG Tingting4. Driving Stability of Wheel Loader under Multiple Road Conditions [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 140-146.
[9]	DU Zixue, WU Haoxin, YANG Zhen. Curve Negotiation Performance of Linear Motor Straddle Monorail Vehicle [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 127-132.
[10]	DENG Tao1, LI Xin2. Combined Control Method of Intelligent Vehicle Longitudinal and Lateral Motion [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 133-140.
[11]	LI Yaohua, LIU Yang, SONG Weiping, SHAO Pandeng, REN Tianyuan. Components Durability Test Conditions Based on Driving Condition [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 141-146.
[12]	LIU Zhen1,3, LIN Xin1,2, WU Huawei1,3, YE Congjin1,3, GENG Xiangyang4. Design of IGBT Heat Dissipating Fin Structure Based on STAR-CCM+ [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(03): 128-134.
[13]	LI Jun, ZHANG Jun, ZHANG Shiyi. Lithium Battery SOC Estimation Based on ABP-EKF Algorithm [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(03): 135-140.
[14]	HAO Gang1, 2, JIN Tao1. Performance Degradation Assessment of Rolling Bearings Based on Hidden Markov Model [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 123-128.
[15]	LIU Chaotao, DI Kehong, DU Zixue, YANG Zhen. Active Control of Straddle Monorails Pantograph-Catenary Coupling [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 129-135.

Control Method for Electric Power Steering System Based on Dead-Zone Inverse Transforming Compensation

基于死区逆变换补偿的纯电动转向系统控制方法设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Control Method for Electric Power Steering System Based on Dead-Zone Inverse Transforming Compensation

基于死区逆变换补偿的纯电动转向系统 控制方法设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

基于死区逆变换补偿的纯电动转向系统控制方法设计