中文核心期刊
CSCD来源期刊
中国科技核心期刊
RCCSE中国核心学术期刊

Journal of Chongqing Jiaotong University(Natural Science) ›› 2001, Vol. 20 ›› Issue (2): 50-53.

Previous Articles     Next Articles

Study on industrial parameter of SBS polymer-modified asphalt

HAO Pei wen,ZHANG Yi luo,JIANG Jian kong,XU Yong ming   

  1. College of Highway,Xian Highway University,Xian 710064,China
  • Online:2001-06-20 Published:2016-07-12

改性工艺参数对SBS改性沥青性能影响研究

郝培文,张宜洛,江建坤,许永明   

  1. 西安公路交通大学公路工程学院 陕西西安710064

Abstract: The paper studied SBS polymer modified asphalt.It an alysed effect of blend time and temperature on SBS polymer modified asphalt prop erties,and the results show the effective blend time for Japanese asphalt,SLi as p halt and LAL asphalt modified with SBS polymer are espectively 3 hours,3 hours a nd 4 hours,based on temperature susceptibility?high temperature stability and l ow temperature stability of asphalt.With the increase of the blend temperature, the temperature susceptibility of SBS polymer modified asphalt is decreased,the soft point and ductility at low temperature are increased,and it shows that incr easing of blend temperature is beneficial to compatibility between SBS polymer a nd asphalt.

Key words: blend time, blend temperature, modified asphalt, performance

摘要: 通过对SBS改性沥青的研究,分析了搅拌时间和温度变化对改性沥青性能的影响,结果表明 :在综合考虑感温性、高温稳定性及低温抗裂性等指标时,搅拌温度在 180℃条件下,日本沥青、胜利沥青及兰炼沥青用SBS进行改性时其合理的搅拌时间分别为 2h,3h和 4h;随着搅拌温度的升高,改性沥青的感温性降低、软化点、低温延度增加;说明适当增加搅拌温度有利于聚合物与沥青的相容

关键词: 搅拌时间, 搅拌温度, 改性沥青, 力学性能

CLC Number: