A Preliminary Exploration of the Design Methods in SFRC Arch Bridge

Journal of Chongqing Jiaotong University(Natural Science) ›› 1990, Vol. 9 ›› Issue (4): 25-32.

Previous Articles Next Articles

A Preliminary Exploration of the Design Methods in SFRC Arch Bridge

Meng Yun¹, Tang Yi²

1. Bridge and Structure Engineering Department;
2. Guangzhou Highway Department, Guangzhou

Received:1990-02-05 Revised:1990-07-28 Online:1990-08-20 Published:2016-11-08

钢纤维砼拱桥设计方法初探

蒙云¹, 唐毅²

1. 本院:结构工程系;
2. 广州公路局

作者简介:蒙云,男,42岁,讲师

Abstract

Abstract: Steel Fibre Reinforced Concrete (SFRC) is a kind of up-to-date reinforcing materials in the world. In Oct., 1989, the first SFRC box ribbed arch bridge was completed in Chongqing. This paper will try to carry on a preliminary study of the SFRC arch bridge in the design methods, computations and new calculated models of strength with the building of the test bridge.

Key words: SFRC(Steel Fibre Reinforced Concrete), arch bridge, design

摘要： 钢纤维增强砼是一种新型复合材料。1939年10月在重庆市修建了我国第一座钢纤维增强砼箱形肋拱桥。本文将结合试验桥的修建对钢纤维增强砼拱桥的设计方法、要点、计算方法及强度验算公式等作一简单介绍,供同行参考。

关键词: 钢纤维砼, 拱桥, 设计

Meng Yun, Tang Yi. A Preliminary Exploration of the Design Methods in SFRC Arch Bridge[J]. Journal of Chongqing Jiaotong University(Natural Science), 1990, 9(4): 25-32.

蒙云, 唐毅. 钢纤维砼拱桥设计方法初探[J]. 重庆交通大学学报（自然科学版）, 1990, 9(4): 25-32.

[1]	WU Zhouhu. Properties and Optimization Design of a New Heteromorphic Ellipse Tunnel Cross-Section [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(01): 87-95.
[2]	WANG Zhen1,2, ZHOU Jianting1,3, ZHANG Jinquan1,4, WU Haijun1, WU Yuexing1. Influence Analysis of Cast-in-Situ Segment Length on Mechanical Behavior of Ten-Thousand-Ton Horizontal Swivel Cable-Stayed Bridge [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(12): 44-52.
[3]	DU Xuejing, CHEN Zhanli, ZHOU Huachen, ZHANG Meiou, SONG Jiali. Crashworthiness of RCAR Low-Speed Collision Energy Absorbing Box for Pure Electric SUV [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(12): 117-123.
[4]	CHEN Suhua1,2，DING Jianming1,2，JIANG Yanxu2，YU Zhiguang2，LIN Feng2. Application of BIM Technology in the Lotus Bridge and Mechanical Properties of Special-Shaped Cable Tower [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(10): 43-48.
[5]	LI Xiaogang1，DING Peng1，CHEN Xiaohu1，ZHOU Jianting2，WU Haobo2. Optimum Design of Stirrup Reinforcement of Ribbed Arch Bridge Considering Randomness of Parameters [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(10): 49-53.
[6]	YAN Renzhang1,2, ZHU Meihao1,2, WANG Shuai3, QIU Junli1,2, ZHOU Jianting1,2. Design and Mechanical Properties Analysis of Cable-Hingeless Arch Composite Structure [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(07): 47-59.
[7]	DU Qing, ZHANG Senbo, QING Longbang. Analysis and Simulation of Mechanical Performance of Precast Segmental Assembly Piers [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(07): 73-80.
[8]	ZHANG Min1, XU Nuo1, ZHOU Linqi1, HAN Yu1,2. Influence of Inserting Steel Plates on the Cable Force and Alignment of Main Arch [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(06): 53-58.
[9]	LING Tianqing1，YANG Yunlong2，ZHAO Cheng3，ZHU Liwei3，CHEN Qiaoqiao4. Design of Asphalt Mixture with Low Voidage Based on PFC3D [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(06): 73-80.
[10]	JI Mingjun，WANG Heng，GAO Zhendi，ZHANG Jinwei. Optimization of the Ore Ship Route of the Yangtze River Channel Considering the Tide [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(05): 108-116.
[11]	DENG Renren1,2，ZUO Hongbing1,2, HE Shengli1,2, TIAN Dawei1,2, DENG Feng1,2, SONG Jinhai1,2. Diversified Design of Onshore Power Supply for Ships and Its Application [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(05): 138-144.
[12]	ZHANG Furen，XIA Wenyan. Effect of Boundary Layer Mesh Parameters on Simulation Results of Vehicle External Flow Field [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(04): 110-115.
[13]	ZHENG Li,WANG Wei. Mixing Ratio Design of Graded Crushed Stone Based on Shear Resistance [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(01): 92-97.
[14]	LI Jun, LENG Chuan. Multi-objective Lightweight Design of Vehicle Door Based on RBF Neural Network Model [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(11): 127-132.
[15]	SUN Jiancheng1, JIANG Haopeng1, YANG Wenwei1, ZHU Shuanghan1, WANG Kun2. Method of Three-Dimensional Parametric Bridge Standard Modeling Based on BIM Technology [J]. Journal of Chongqing Jiaotong University(Natural Science), 2019, 38(10): 19-24.

A Preliminary Exploration of the Design Methods in SFRC Arch Bridge

钢纤维砼拱桥设计方法初探

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics