Measure Point Layout of Modal Test of Highway Curved Beam Bridge

doi:10.3969/j.issn.1674-0696.2020.06.08

Abstract

Abstract: In order to obtain the optimal layout of the measuring points for testing the modal shape of the highway curved beam bridge, the effective independent method was used to calculate the layout position of measuring points, and the modal assurance criterion was introduced to check the accuracy of the measuring points. Taking an actual three-span continuous curved beam bridge as an engineering background, the program of finding the location of corresponding measuring points by the effective independent method was compiled by MATLAB, and the sensor arrangement measuring points of the first 10 modes were calculated respectively. The angle of the modal vector space (PMACi value) of each modal measuring point was calculated, and four modes among them were selected for real bridge verification. The results show that most of the PMACi values meet the modal assurance criterion, and the results of real bridge test are very similar to those of the finite element modal, which indicates that the proposed scheme of measuring point arrangement can be applied to the modal test of three-span continuous curved beam bridge, and the effective independent method can effectively provide a reference for the measuring point layout of modal test of highway curved beam bridge under environmental excitation.

Key words: bridge engineering, modal test, optimal layout of measuring point, effective independent method, curved beam bridge, ambient excitation

摘要： 为得到测试公路弯梁桥模态振型的测点优化布置方案，采用有效独立法运算测点布置位置，并引入模态保证准则检验测点的准确性。以某实际三跨连续弯梁桥为工程背景，通过MATLAB编制有效独立法寻找相应测点位置的程序，分别计算了前10阶模态的传感器布置测点；计算各阶模态测点的模态向量空间夹角(PMACi值)；并选取其中4阶模态进行实桥验证。结果显示：多数PMACi值满足模态保证准则，并且实桥测试结果与有限元模态相似度很高；结果表明：测点布置方案可以运用到三跨连续弯梁桥的模态测试中，有效独立法能有效为公路弯梁桥在环境激励下开展模态测试提供测点布置参考。

关键词: 桥梁工程, 模态测试, 测点优化布置, 有效独立法, 弯梁桥, 环境激励

CLC Number:

U446.3

LIANG Dong1,2, ZHANG Congzheng1, CHEN Lei1. Measure Point Layout of Modal Test of Highway Curved Beam Bridge[J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(06): 46-52.

梁栋1,2，张聪正1，陈磊1. 公路弯梁桥模态测试的测点布置[J]. 重庆交通大学学报（自然科学版）, 2020, 39(06): 46-52.

References

［1］邓焱，严普强.桥梁结构损伤的振动模态检测［J］.振动、测试与诊断，1999，19(3)：157-163.
DENG Yan, YAN Puqiang. Vibrationmode detection of bridge structure damage［J］. Journal of Vibration, Measurement and Diagnosis, 1999, 19(3): 157-163.
［2］吴向男，徐岳，梁鹏，等.桥梁结构损伤识别研究现状与展望［J］.长安大学学报(自然科学版)，2013，33(6)：49-58.
WU Xiangnan, XU Yue, LIANG Peng, et al. Current status and prospects of bridge structure damage identification［J］. Journal of Changan University (Natural
Science Edition), 2013, 33(6): 49-58.
［3］梁栋，陈红霞，杜延昭，等.基于高斯曲率模态相关系数判断简支T梁桥支座损伤的方法研究［J］.四川建筑科学研究，2017，43(2)：53-58.
LIANG Dong, CHEN Hongxia, DU Yanzhao, et al.Research on the judgement method of simply supported T-beam bridge bearing damage based on Gauss curvature mode
correlation coefficients［J］. Sichuan Building Science, 2017, 43(2): 53-58.
［4］ KAMMER D C. Sensor placement for on-orbit modal identification and correlation of large space structures［J］. Journal of Guidance, Control, and Dynamics,
1991, 14(2): 251-259.
［5］ KAMMER D C. Sensor set expansion for modal vibration testing［J］. Mechanical Systems & Signal Processing, 2005, 19(4): 700-713.
［6］余鹏，陈美霞，谢坤.基于有效独立法对圆柱壳结构声振响应预报的测点布置研究［C］∥中国造船工程学会.第十五届船舶水下噪声学术探讨会论文集. 2015：122-129.
YU Peng, CHEN Meixia, XIE Kun. Research onarrangement of measuring points of acoustic vibration response prediction of cylindrical shell structure based on
effective independent method［C］∥CSNAME. Proceedings of the 15th Symposium on Underwater Noise of Ships. 2015: 700-713.
［7］李东升，李宏男，王国新，等.传感器布设中有效独立法的简捷快速算法［J］.防灾减灾工程学报，2009，29(1)：103-108.
LI Dongsheng, LI Hongnan, WANG Guoxin, et al. Simple and fast computation algorithm of the effective independence for sensor placement［J］. Journal of Disaster
Prevention and Mitigation Engineering, 2009, 29(1): 103-108.
［8］刘伟，高维成，李惠，等.基于有效独立的改进传感器优化布置方法研究［J］.振动与冲击，2013，32(6)：54-62.
LIU Wei, GAO Weicheng, LI Hui, et al.Improved optimal sensor placement methods based on effective independence［J］. Journal of Vibration and Shock, 2013, 32(6):
54-62.
［9］ LI Juelong, ZHANG Xun, XING Jianchun, et al. Optimal sensor placement for long-span cable-stayed bridge using a novel particle swarm optimization algorithm［
J］. Journal of Civil Structural Health Monitoring, 2015, 5(5): 677-685.
［10］李东升，张莹，任亮，等.结构健康监测中的传感器布置方法及评价准则［J］.力学进展，2011，41(1)：39-50.
LI Dongsheng, ZHANG Ying, REN Liang, et al.Sensor deployment for structural health monitoring and their evaluation［J］. Advances in Mechanics, 2011, 41(1): 39-50.
［11］何华，张力文，周建庭，等.基于EI及MAC算法的连续刚构桥传感器优化布置［J］.重庆交通大学学报(自然科学版)，2011，30(5)：921-924.
HE Hua, ZHANG Liwen, ZHOU Jianting, et al. Optimalsensor placement of continuous rigid frame bridge using algorithm based on effective independence and modal
assurance criterion methods［J］. Journal of Chongqing Jiaotong University(Natural Science), 2011, 30(5): 921-924.
［12］ RAO A R M, ANANDAKUMAR G. Optimal placement of sensors for structural system identification and health monitoring using a hybrid swarm intelligence
technique［J］. Smart Materials & Structures, 2007, 16(6): 26-38.
［13］周林，赵杰，冯广飞.装备故障预测与健康管理技术［M］.北京：国防工业出版社，2015：84-86.
ZHOU Lin, ZHAO Jie, FENG Guangfei.Equipment Failure Prediction and Health Management Technology［M］. Beijing: National Defense Industry Press, 2015: 84-86.
［14］董小圆，彭珍瑞，殷红，等.传感器优化布置的距离系数-Fisher信息准则［J］.智能系统学报，2017，12(1)：32-37.
DONG Xiaoyuan, PENG Zhenrui, YIN Hong, et al. Distance coefficient-fisher information criterion for optimal sensor placement［J］. CAAI Transactions on Intelligent
Systems, 2017, 12(1): 32-37.
［15］ BRINCKER R, VENTURA C. Introduction to Operational Modal Analysis［M］. New York: John Wiley and Sons, 2015.
［16］单德山，黄珍，李乔.桥梁结构运营模态参数识别方法对比［J］.桥梁建设，2017，47(5)：27-32.
SHAN Deshan, HUANG Zhen, LI Qiao. Comparison of operational modal parameter identification methods for bridge structures［J］.Bridge construction, 2017, 47(5): 27
-32.

[1]	ZHOU Jianting1,2, LI Ya2, ZHANG Hong2, XIA Runchuan2, YANG Wenqi2. Two Point Corrosion Test Study of Steel Strands Based on Spontaneous Magnetic Flux Leakage Detection [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 74-81.
[2]	ZHANG Hua1, ZHANG Zhengqi2, CHENG Gao3,4, TIAN Boke1. Rational Distance of Pile Foundation in Precipitous Cliff Section of Loess Area [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(07): 93-98.
[3]	LIU Jinchun, SONG Zixuan, LIANG Dong. Spatial Effect Analysis of Single Box Three Chambers Continuous Girder Bridge under Transverse Temperature Gradient and Eccentric Vehicle Load [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(06): 80-86.
[4]	ZHENG Zhi1,2, GENG Bo2, YUAN Pei2, LI Songlin2, HU Zhengtao3. Experimental Study on a New Connection Structure of Anti-collision Device for Pier Composite Materials [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 66-73.
[5]	ZHANG Yang1, QU Shaoqin1, LU Jiuzhang2, HUO Wenbing3. Method of Fiber Aligning in UHPC and Its Influence on the Tensile Performance [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(05): 74-80.
[6]	FU Lilei. Correlation Function Method for Parameter Identification Based on Random Excitation Response [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 70-75.
[7]	SU Xiaobo1, XIAO Lin2. Model Test and Numerical Simulation Research on Reasonable Structure of Steel-Concrete Composite Section in Space Rigid Frame [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(04): 76-82.
[8]	LIANG Zongbao 1, CHAI Jie1, NA Shouyong2, MA Tianli1, TANG Yu1. Validity Analysis of Bridge Health Monitoring Data Based on Deep Learning [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(03): 78-83.
[9]	TANG Qizhi1, XIN Jingzhou1,2, ZHOU Jianting1, FU Lei1,3, ZHANG Jun4. Damage Identification of Corroded RC Arch Based on Time Series Analysis:Simulation and Verification [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 69-77.
[10]	RONG Xian1, 2, YANG Hongwei1, ZHANG Jianxin1, 2. Experimental Research on Hysteresis Behavior of Prefabricated Concrete Beam-Column Joint with Steel End Connector [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(02): 78-82.
[11]	LIU Xiaohui, XU Yang, CHEN Sitian, XU Lueqin. Seismic Response Analysis of Pedestrian Suspension Bridge [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(01): 65-71.
[12]	JU Liping1, WANG Yinhui2, LU Xiaohong3, SHAN Jidong4. Failure Mode Analysis of Reinforced Concrete Box Girder under Impact of a Falling Cargo from Passing Truck [J]. Journal of Chongqing Jiaotong University(Natural Science), 2021, 40(01): 72-78.
[13]	WANG Zhen1,2, ZHOU Jianting1,3, ZHANG Jinquan1,4, WU Haijun1, WU Yuexing1. Influence Analysis of Cast-in-Situ Segment Length on Mechanical Behavior of Ten-Thousand-Ton Horizontal Swivel Cable-Stayed Bridge [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(12): 44-52.
[14]	HAO Xianwu, SHU Peng, HAO Jianming. Static Wind Stability of Long-Span Asymmetric Suspension Bridge [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(12): 53-59.
[15]	CHEN Sitian, PENG Qing, YANG Min. Human-Induced Vibration Response Analysis of Long-Span Pedestrian Suspension Glass Bridge in Kanggu Parkland [J]. Journal of Chongqing Jiaotong University(Natural Science), 2020, 39(12): 60-66.