[1] 张哲, 李立民, 田津津,等. 冷藏运输车温度场不均匀度对蔬菜保鲜效果的影响[J]. 农业工程学报, 2014, 30(15):309-316.
ZHANG Zhe, LI Limin, TIAN Jinjin, et al. Effect of temperature distribution of refrigerated transporter on preservation of
vegetables [J] . Journal of Agricultural Engineering, 2014,30 (15): 309-316.
[2] 赵春江, 韩佳伟, 杨信廷,等. 基于CFD的冷藏运输车车厢内部温度场空间分布数值模拟[J].农业机械学报, 2013,44(11):168 -173.
ZHAO Chunjiang, HAN Jiawei, YANG Xinting, et al.Numerical simulationof spatial distribution of temperature field inside a
refrigerated transporter based on CFD [J]. Transactions of the Chinese Proprietary Machinery, 2013, 44 (11): 168- 173.
[3] LIU M, SAMAN W, BRUNO F. Development of a novel refrigeration system for refrigerated trucks incorporating phase
change material [J]. Applied Energy, 2012, 92(4):336-342.
[4] 高鹏, 王丽伟, 王如竹,等. 汽车尾气驱动的吸附式冷藏运输车制冷系统的研究[J].工程热物理学报, 2016, 37(10):2180- 2184.
GAO Peng, WANG Liwei, WANG Ruzhu, et al.Research on refrigeration system of adsorption refrigerated transporter driven by
vehicle exhaust [J]. Journal of Engineering Thermophysics, 2016, 37 (10): 2180-2184.
[5] 陈宜, 韩巍, 孙流莉. 余热驱动的吸收压缩复合式低温制冷系统研究[J].工程热物理学报, 2017, 38(1):18-26.
CHEN Yi, HAN Wei, SUN Lili.Released heat-driven absorption compression composite cryogenic refrigeration system [J].
Journal of Engineering Thermophysics, 2017, 38 (1): 18-26.
[6] KAYANSAYAN N, ALPTEKIN E, EZAN M A.Thermal analysis of airflow inside a refrigerated container [J].International
Journal of Refrigeration, 2017, 84:76-91.
[7] WANG J M, ZHAO X X, LI L J, et al. Air Supply system optimization for the multi-temperature refrigerated trucks [J
]. Key Engineering Materials, 2013, 546:35-39.
[8] 贵付邹. 新型太阳能电池的机遇与挑战[J].科学通报,2017,62(14): 1446- 1446.
GUI Fuzou. Opportunities and challenges of new solar cells [J].Chinese Science Bulletin, 2017, 62 (14): 1446-1446.
[9] DOU L, YOU J, YANG J, et al. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer [J] .
Nature Photonics, 2012, 6(3):180-185.
[10] MICHEAUX T L D, DUCOULOMBIER M, MOUREH J, et al. Exper-
imental and numerical investigation of the infiltration heat load during the opening of a refrigerated truck body [J ].
International Journal of Refrigeration, 2015, 54:170-189.
[11] MCKENNA E, MCMANUS M, COOPER S, et al. Economicand
environmental impact of lead-acid batteries in grid-connected domesticm PV systems[J].Applied Energy,2013, 104 (2):239-
249.
[12] 彭思敏, 施刚, 蔡旭,等. 基于等效电路法的大容量蓄电池系统建模与仿真[J]. 中国电机工程学报, 2013, 33(7):11-18.
PENG Simin, SHI Gang, CAI Xu, et al. Modeling and simulation of large-capacity battery based on equivalent circuit method
[J]. Proceedings of the CSEE, 2013, 33 (7): 11-18.
[13] 陈维荣, 李晓嫣, 彭飞. 燃料电池电动自行车动力系统设计与整车建模[J].西南交通大学学报, 2013, 48(6):1066-1071.
CHEN Weirong, LI Xiaoyan, PENG Fei .Dynamic system design and vehicle modeling for fuel cell electric bicycle [J].
Journal of Southwest Jiaotong University, 2013, 48 (6): 1066-1071.
[14] SUVORKOVA E E, DEMENTIEV Y N, BURULKO L K. Hybrid synchronous motor magnetic field analysis[J]. Applied Mechanics
& Materials, 2015, 792:26-32.
[15] NOVAK M, NOVAK J, CHYSKY J. Experimental verification of high-speed permanent magnet synchronous motor model[C ]//
International Conference on Electrical Machines. Marseille:IEEE, 2012:2433-2438.
[16] YU B, SHU W. Research on turbofan engine model above idle state based on narx modeling approach[C]//Materials
Science and Engineering Conference Series.Materials Science and Engineering Conference Series.England: IOP Conference
Series, 2017:012002.
[17] RAGHEB H, AYDIN M, EL-GINDY M, et al. Comparison of gra-
dability performance of fuel cell hybrid electric and internal-combustion engine vehicles[J]. Journal of Power Sources,
2013, 221:447-454. |